Jump to content
SAU Community

Fuel Cut When Cruise


YangLIU
 Share

Recommended Posts

Hi buddies,

just changed high flow turbo and spark plugs.

now i found there is random fuel cut problem:

1. when keep around 40% throttle on acceleration and get around 8-10PSI. sometimes i will get fuel cut once suddenly, boost pressure is gone. at this time, if i press acc pedal a bit more deeply, and make more throttle, then the car will keep acceleration and make more boost.

2. when cruise on motoway at 110km/h, just keep around 20-25% throttle on acceleration. it is about 2500-3000rpm and around -5PSI. sometimes i will get fuel cut too, just suddenly feel fuel cut and boost go down to -15PSI. I need to press acc pedal more deeply then the car will accelerate. it makes hard to cruise at 110km/s. i found there is no problem when cruise at 80km/s,90km/s,100km/s.

all fuel cut problem is just a second. all i need to do is press acc pedal more deeply

i keep my eye on boost gauge and AFM voltage, no problem when i got fuel cut.

any idea for this? :woot:

Edited by YangLIU
Link to comment
Share on other sites

Run the cell code procedure to see if you have a P0235 error code (no your engine light doesnt have to be on to have this error code)

I always has P0235 due to I have blitz EBC.

Link to comment
Share on other sites

Just because you have it doesnt mean thats why. The P0235 code is unexpected overboost. Clear the code and see if it helps. I had a hdi ebc and didnt constantly have the code.

i heard this from somewhere:

if the car is cold, then stock ECU will not allow high boost.

so if you are running EBC, you will easily get P0235 error.

but actually when i got fuel cut, the boost is less than 12PSI. i think there is no overboost?

how about remove/block stock boost sensor (for stock boost controller, not for the gauge)?

Edited by YangLIU
Link to comment
Share on other sites

Have you still got the stock boost controller plugged in?

yes. stock boost sensor plugged, stock solenoid plugged (just connect two port of solenoid together with a silicon pipe)

Link to comment
Share on other sites

I have removed the gauge boost sensor. I still have the boost sensor that is near the bov. Have you taken your car to a mechanic or nissan to run a consult on it.

i haven't ran on consult. I just run cell code procedure every time. any difference between consult and cell code procedure?

i think the problem is not related to stock gauge boost sensor.

Edited by YangLIU
Link to comment
Share on other sites

Sounds like AFM or boost cut. Both can show up at weird times as the turbo is much larger now, more airflow for the same boost. Definitely get it on a Consult3 and let us know. If there is no real error showing up, it could just need a tune as it's hitting parts of the map it was never supposed to.

Which highflow did you go for? It might be time for an Emanage...

Link to comment
Share on other sites

Sounds like AFM or boost cut. Both can show up at weird times as the turbo is much larger now, more airflow for the same boost. Definitely get it on a Consult3 and let us know. If there is no real error showing up, it could just need a tune as it's hitting parts of the map it was never supposed to.

Which highflow did you go for? It might be time for an Emanage...

actually i got this GCG highflowed turbo from a mate, not quite sure how they highflowed it. GCG just told me both intake and exhaust end get highflowed.

i haven't got boost/AFM cut when hit 19-20PSI. my problem always happens when boost at around -5PSI or 8-10PSI.

i cleaned P0235 error code and lower the boost level a bit on EBC.

i saw the stock boost sensor is before throttle and boost sensor (for stock gauge) is at the end of manifold (after throttle). I connected my EBC with boost sensor (for stock gauge) together at the end of manifold. im thinking shall i move stock boost sensor to the end of manifold too with EBC together, because the boost level before throttle is a bit higher than manifold (after throttle)

post-137368-0-21147000-1440556687_thumb.jpg

Edited by YangLIU
Link to comment
Share on other sites

Only the MAP sensor on the BOV pipe is causing the code, and it means the sensor is seeing 21psi or more. Looks like your gauge is out by a fair bit.

The cut will be AFM, it isn't just a voltage cut, it cuts at lower voltages depending on the cell it's in on the map at the time.

Link to comment
Share on other sites

Only the MAP sensor on the BOV pipe is causing the code, and it means the sensor is seeing 21psi or more. Looks like your gauge is out by a fair bit.

The cut will be AFM, it isn't just a voltage cut, it cuts at lower voltages depending on the cell it's in on the map at the time.

from EBC, i never hit 21psi, so i assume move MAP to manifold could resolve P0235 issue?

for AFM cut, i need to scan with consult3 later

Edited by YangLIU
Link to comment
Share on other sites

With a Highflow you should not really be trying for boost over 19psi on the standard injectors and fuel pump. When I had my 30/71r I only ever ran 17PSI.

just saying

sweet!

any idea for the boost/afm cut when cruise on motoway or 8-10psi boost.

Edited by YangLIU
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Go to SP mufflers and get the muffler of size you want and make a nice mid muffler. It's about that simple! I have 2x 3.5 Magnaflow straight through Mufflers and while it's pretty loud with the Varex open, it's quiet enough with the Varex closed. You can also buy off the shelf Magnaflow straight through mufflers as well. You also have a turbo to quiet the car down too. Don't overthink it. Buy my extra Magnaflow muffler sitting on a shelf doing nothing (buy it new, ignore this part)
    • Centre-offset muffler under the floor, same as stock. Just....3.5". The change from straight pipe there to centre-offset will mean that you need to remake some of the pipe (add a bend or two).
    • Hey guys. So my R34 GTT has a custom 3.5” exhaust (done by previous owner) with a high flowing cat, and then just a Varex cannon muffler on the back. The car does drone alot and is really loud even on highway driving just cruising, as you can imagine due to the Varex muffler basically being a straight through with the valve open. As much as i love a loud RB, it can be a bit much with no other muffling in line and just driving casually. I wanted to lower the volume output on the exhaust a bit, as well as remove the drone (probably a way to do both at once), and was going to do it all myself as I am a fabricator and have done exhaust work in the past, so the fab work isnt my issue, im just not sure on the right product or type of product to use to get the job done, and i doubt an exhaust shop would be wanting to help me as they wont be making any money from helping me, unless they supplied the product? Anyway any help or guidance in best way to approach this would be awesome   Thanks in advance
    • Meh, whilst the Honda is a "really" good car and has potential if you want to drop coin on, it was uninspiring for me to look at, but, it did serve its purpose and is now in the boys hands, his happy, his girl is happy, as she wasn't to keen on the noisy old Patrol, and most importantly, the Minister for War and Finances is extremely happy that her "little baby boy" (6'2 nugget who is currently training to be a copper, which will make 3 coppers in the immediate "circle of trust") has a well sorted reliable car that doesn't guzzle diesel Me, I'm more than happy with the NC MX5 that I replaced it with, it's a fun little car that I like looking at, like driving, and yes..... I do like the fact that the maintenance and modifications that I have done/will do are plentiful and relatively cheap, well........ while staying naturally aspirated slow that is, and that's all I really need for a fun little daily, I can rev the 5hit out of it rowing through the gears and never really break the speed limit  In saying that wicked word, "modifications", I've already ordered something for some noise and an additional "3 ish" horse powers, or whatever it gives, in the form of a header, and, a new set of "cheapo" BC coilovers that are already sitting in the shed waiting to get put in, I had the same BC's in my old NB and found they were fine for the street, hwy, and the occasional track days I did in it, they have 6kg front and 4kg rear springs which is about 10% stiffer than the stock springs which I found worked well for their price  I've also already been in touch with MX5 Mania in Dural, so once the header is on it will get a ECUTek RaceROM tune there (I cannot rev match for 5hit, and I loved the RaceROM rev match and FFS in my old 86 "RIP") In other, maintenance news, I put some new sparkler plugs in it, and have a new set of DBA Street series pads to put in over the next day or so, I'm running the DBA street series in the SS and Honda and really like them, they work great and are not dusty at all I've also booked in a few days leave over this weekend to give me 4 days weekend do some paint correction and give the leather seats some conditioning and interior some Bissell and steam cleaning OCD lovin', the carpet and interior looks clean, but from my experience with the Bissell IRT carpet, and the steam cleaner IRT trim, looks can be deceiving I've also found that finding a detachable hard top is proving problematic, the main reason why I didn't like the NC initially was the power retractable hard top that I seen them with gave the roof line a weird look, the detachable roof though looks good, and is a same shape as a NA/NB hard top, similar, but unfortunately not the same as it has different fixture point on the front, so fitting a easy to get NA/NB detachable hard top is no bueno New Old cars are fun, cleaning, hunting and playing around brings much joy How are your beasties going? Do you still have the Skyline with the LS???, or Barra??? that you were playing with
×
×
  • Create New...