Jump to content
SAU Community

Recommended Posts

Hello, new member here. I'm in the US and as you know, Skylines are just becoming legal here and I was able to scoop one up. I'll admit, I'm not super knowledgeable with the ins and outs of these cars and come from the Subaru world prior to this. Anyway, I purchased a 90 gts-t and was told that the rear diff is pretty aggressive although the importer couldn't tell me what it was. It doesn't seem to be welded going off of my limited knowledge. However, it's pretty annoying honestly (very loud and rough around turns) and I don't plan to track the car or do much more than regular driving, so I plan to just grab a stock rear diff instead. I was hoping to find out what diff is currently on the car though to ensure no strange swaps involving the driveshaft and such were done so I know that what I purchase will fit. Not expecting anyone to know what's going on inside the casing, but rather just want to know if this is a r32 gtst diff or if it looks swapped. Looked at a good bit of photos of others for sale trying to match one up but not having a ton of luck.

I've attached a couple of photos I was able to grab when looking under the car. If any additional photos or info would help in identifying, please let me know and I'll follow up. Appreciate any help!

20862088198_0658ed2995_c.jpg

20862088138_9d22e3a8d3_c.jpg

Link to comment
https://www.sau.com.au/forums/topic/459394-help-identifying-rear-diff/
Share on other sites

You have to open her up and get a picture of the centre. It might very well be welded.

If you don't want to open it up change the oil and see if it helps.

Thanks for the reply. Even if it's just welded, I'll likely replace it. I'll just be using the car for regular cruising. Just wanted to see if it was a standard r32 gtst casing before I ordered something to ensure it'd fit (in case the previous owner replaced it along with driveshaft or something weird like that. Parts aren't cheap and easy to come by here, so wanted to make sure I am getting the right thing.

It's just a standard casing. No-one would ever normally bother to change that on an R32. The diff itself will most likely be an aftermarket 2-way mechanical. Again because almost no-one would bother welding one when mech centres are readily available and not too expensive. The good news is that a decent mech diff sells for $500-$1000 2nd hand. So you might come out of this with money in your pocket if you can locate a stocker.

FWIW, the stock VLSD is a piece of shit and you will hate yourself if you install one. Single spinners suck dogs' balls.

It's just a standard casing. No-one would ever normally bother to change that on an R32. The diff itself will most likely be an aftermarket 2-way mechanical. Again because almost no-one would bother welding one when mech centres are readily available and not too expensive. The good news is that a decent mech diff sells for $500-$1000 2nd hand. So you might come out of this with money in your pocket if you can locate a stocker.

FWIW, the stock VLSD is a piece of shit and you will hate yourself if you install one. Single spinners suck dogs' balls.

Awesome, thanks. Yeah whatever it is, it's pretty damn rough when doing slow turns. Rather than some wheel squeal and drag, it's more like a clunking and rough drag, almost feels and sounds like the car is just broken. Either way, I'm not a fan and likely don't need it so if I can locate another option for a good price, whether it be a stock one or something much less aggressive, I'll be happy and will crack this open to see what it is and maybe sell to someone who does want it.

that's funny, what you describe is a mechanical diff centre in action. Agreed it's not particularly gentle but as above, if you fit a standard vlsd you'll like cornering and driving in general ALOT less, the mechanical lsd rocks for any kind of performance driving over the stock unit. Here in aus 2ndhand vlsd complete diffs go for about $2-300 so you'd definitely be able to get ALOT more for your mechanical centre if you decide to swap it out.

  • Like 1

wouldn't have to be drift, a lot of people who own skylines modify them in a similar way. Before you ditch the mechanical centre, you could check the settings and adjust it most likely to make it more street friendly. Eg set it to 1-way, not 2way, alter the order of the clutch plates to make it lock less harshly.

I'm pretty good mechanically. Between my brother and I we've tackled just about all maintanence and work to our cars ourselves including some decent builds, fab, paint, etc. Don't have much drivetrain experience though but nothing I likely couldn't figure out. Maybe I'll just crack it open in the near future and see what I'm working with and go from there if I can find some decent how-tos. Currently I'm tackling some rust in the trunk and will be dropping the fuel tank, cutting, and welding new pieces in this weekend hopefully. Luckily my brother runs a laser cutter (not sure the proper name) at my uncles shop and can shape and bend up the pieces for it.

Appreciate the help and info so far!

Edited by Timtim123

On the off-chance it's a Custco diff, this article shows how to tune the diff:

http://www.motoiq.com/MagazineArticles/ID/2966/Project-370Z-Improving-Grip-by-Tuning-a-Cusco-RS-LSD.aspx

Awesome, thank you. If I cracked open the casing, are they usually pretty clearly labeled, as far as brand and such? I'll prob look into it once I finish some of the bodywork.

If I cracked open the casing, are they usually pretty clearly labeled, as far as brand and such?

No, they're usually not. You will need to do some googling and looking at various manufacturer's sites and there are also many threads on here you can use for reference. Many have no markings at all. By looking at different photos you can usually get close to working out whether it's Nismo or Cusco or one of the other options, as they do look a little different (where they are machined, where they are not, shapes of the openings, etc). You will also be able to work out if it is 1-way, 1.5-way or 2-way if you know where to look and what to look for. Again, this has been discussed on here heaps, so there's plenty of info to help you. At the very least you can take a bunch of GOOD QUALITY HIGH RESOLUTION photos and post them up if you need a second opinion.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Curious to see how the SpeedTek stuff holds up
    • The holdups last year were drivetrain related. I had the car out right after getting the bearing issue resolved. Third launch and the car didn't move after releasing the clutch. It had sheared all the engagement teeth off the 1st gear.    Thankfully no other damage was done. I set an aftermarket gear beside an OEM gear and found that the engagement teeth on the OEM gear were much larger and better supported. Looking through my bin of spare transmission gears I found that there are two types of tooth on the OEM first gears - the larger tooth and the smaller tooth. It looks like most aftermarket gearset manufacturers base their design on the smaller tooth. OEM large tooth left - Speedtek, OS Giken, etc or OEM small tooth right Decided to give that larger engagement tooth a try. Pressed the ring off an OEM gear and sent it to a transmission manufacturer here in the States. They did their "faceplating" operation with my synchro ring on the Speedtek gear.   I reassembled it, took it back to the track and promptly destroyed the gear itself.  I'll rebuild this and use it as a spare - thankfully just first gear and the countershaft are damaged beyond repair. Definitely disheartening but my welded on engagement tooth ring held up!  Moved to Speedtek's dog engagement design as the gears appear to be much stronger. So far they have taken much more abuse at the track. Also scored a Stillway lockout from the Netherands for super cheap. It's for some other RB transmission so it took a bit of fabrication to fit but honestly a very easy job. I also had to heavily modify the gates as they were very different.   Then for some reason at the last test and tune a silicon coupler below the throttle blew off and took out the radiator and fan. Thankfully it was in the burnout box and not down track. This car is really beating me up - I still haven't made a pass in it. Ran it through the gears many times on the street but it keeps biting me at the track.  Currently in the process of replacing the radiator and remaking the throttle pipe to remove the coupler and use a cast 90 and a vband. I WILL get this thing down the track...
    • Covers most of the above points really. There's a few exceptions but most just see driving as an irritating but necessary task they must complete if they want to get anywhere on time. Also see it as a good time to show their awesome multi-tasking abilities on their mobile and/or doing their makeup.  
    • I don't believe I posted pictures of the second oil pump pickup I added so here they are. Data shows it gets oil pressure up to the relief pressure much earlier in the RPM. Is that important? Not likely... This was just another attempt to fix the bearing issues.   I also heavily opened up the inlet to the pump since it now had to flow oil from two pickups. I believe the diameter increased about 1/8".
    • Yes, ther are plenty of [racist statement alert] terrifying 50+ yr old ladies of a certain ethnic origin who have no demerits yet still manage to park their cars on top of roundabouts, hanging out of multistory car parking structures and other wild shenanigans. Somehow they puddle through years of driving without ever attracting the attention of the cops, yet the whole time, they are an instant away from doing something spectactularly stupid.
×
×
  • Create New...