Jump to content
SAU Community

Recommended Posts

Hey All,

Hope someone has the wiring diagram for the ABS module for a R33 GTS-t... I've looked everywhere and also downloaded a few service manuals which all are focused purely on the engine and not the electricals themselves.

I've found a diagram which shows how the ABS unit is connected theoretically but that's quite useless when determining what wire is what.

Finding ABS schematics for GT-R and it's Attesa systems seems to be easy, but from what I've gathered from my visual comparison is that the wiring between the GTS-t and GT-R ABS / Attesa modules are different.

This is the GT-R one, when I visually compared this diagram to the ABS module bolted under the HICAS ECU it's quite different for my GTS-t boat.

post-19425-0-55022900-1308735404.jpg

Now you're wondering why the heck do I need this wiring schematic? Well... ever seen a modern car launch with minimum slip and no throttle cut? Yes.. they actually retard timing to reduce torque instead of chopping the throttle which cuts everything.

Now, I am planning to connect my front two wheel sensors to my ECU and will be retarding timing based on x % of wheel slip (front vs. rear).. the higher the delta, the more timing is retarded... however not too much retard, because I'll end up with anti lags and bang bang all day instead lol.

I did plan to run the wires directly from the ABS sensor to my circuit (converts sine to square waves) to the ECU.. but that seems a touch messy going into the engine bay.

So yeah, help me do high 10s down the 1/4 with a stock motor RB25 :)

man that's way too much effort haha....

I'll just tap the wiring into the ABS sensor at the front... the rear speed sensor (from gearbox) is already fed back into the ECU.. just need F(RHS + LHS)

Just looks fugly if I run even more freaking wires into the engine bay.

Knowing Nissan, the wiring colour would be different from the ABS sensor plug to the rear ABS ECU.

  • 1 month later...

Let me know if this looks like it might be helpful and i can send some more screenshots or email it to you when i get home from work in the morning.

Screenshot_2015-10-14-02-20-22_zpsbf80xe

EDIT: I haven't exactly included the most helpful part of the diagram here lol but i can find all 4 wheel speed sensors and shows what pins they go to and plugs etc

Edited by 89CAL
  • 3 years later...
On 10/13/2015 at 11:22 AM, 89CAL said:

Let me know if this looks like it might be helpful and i can send some more screenshots or email it to you when i get home from work in the morning.

Screenshot_2015-10-14-02-20-22_zpsbf80xe

EDIT: I haven't exactly included the most helpful part of the diagram here lol but i can find all 4 wheel speed sensors and shows what pins they go to and plugs etc

please tell me you still have this, I've been looking for this in english for more than 10 years, to fix my abs. 

  • 2 weeks later...
On 10/13/2015 at 11:22 AM, 89CAL said:

Let me know if this looks like it might be helpful and i can send some more screenshots or email it to you when i get home from work in the morning.

Screenshot_2015-10-14-02-20-22_zpsbf80xe

EDIT: I haven't exactly included the most helpful part of the diagram here lol but i can find all 4 wheel speed sensors and shows what pins they go to and plugs etc

are you able to email it? I sent my email address to you.

  • 1 month later...
  • 6 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...