Jump to content
SAU Community

Recommended Posts

Hey everyone

Recently I've been having troubles with my 33. I bought it last year, and at the time it was running 14psi, with a high-flowed stock turbo, and nistune-chipped ecu (not a great tune, runs rather rich). Had no problems when I bought it. Other mods the car came with were splitfire coilpacks, upgraded fuel pump, turbosmart bleed valve, FMIC.

A couple of months ago I added a Greddy type s bov (car was bought without bov), which I had a few issues with setting up, because I tee'd it to the same vacuum line as the boost gauge, and it leaked boost. I turned the boost down for a while until I got around to fixing it (this car is also my daily driver so it took a while), but now I've fixed that up and both now have their own source of vacuum. I then turned the boost back up to 14psi.

Lately, when at WOT I've been hitting boost cut when it spools close to 14psi in 3rd and 4th gear, and also there seems to be a massive flat spot which is very noticeable through 2nd gear, which wasn't there before and seems to be getting progressively worse.

I've already changed the spark plugs, as I thought maybe the rich-running engine might have fouled them and caused the engine to run excessively rich, although the old spark plugs were not fouled when I took them out and the new ones haven't made any difference.

Any ideas of what else could be causing this?

Link to comment
https://www.sau.com.au/forums/topic/459633-r33-gtst-huge-flat-spot-boost-cut/
Share on other sites

Could be the nistune falling into the knock map if it's Z32 ECU and the knock sensor mod on the board hasn't been done properly.

The ecu is r33 gtst

Are you running an airflow meter?

Block off the bov and see if it fixes it. If it does then I think the tune needs a bit of tinkering.

It's running a stock rb25 airflow meter. I'll try blocking off the bov again

Are you sure it's a nistune OR just a re-flashed R33 ECU?

Because R33 Nistune Type-6 boards are still in prototype and I don't believe they have gone to market yet..

Anyhow, these days you can use a RB20DET ECU with the new feature pack that controls VCT woots

  • 2 weeks later...

Maybe the spark is giving out above 4000rpm. I know you have spitfires but that doesn't rule it out. Maybe you are running overly rich, fuel pressure regulator busted etc?

What spark plugs are you replacing it with? I hope you are not one of those guys that uses iridiums and gaps them down to 0.01mm. 0.8mm is low enough and use coppers.

The boost cut you are hitting because the AFM is running out of reading range. Nothing you can do about that unless you change to a bigger AFM, so just keep it under that point.

Edited by sonicz

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinda glad I never got to this ..    https://www.facebook.com/groups/1483859159195077
    • @GTSBoy This method was able to get readings of -10 to -2, so it looks like its monitoring.  Now I need to figure out why the vacuum on the line provided isn't alternating with manifold pressure.  I went with 2 lines that an RB25 tuner recommended but I'll get a longer hose and try directly off the back of the manifold.  He may have been used to OEM intake setups while I have a DBW setup that removed the MAF and IACV.  
    • I work at a car detailing and tinting shop called Quark which gets all manner of German cars in usually (mainly due to a contract with Mercedes Benz Kita Osaka, BMW Nishinomiya and others) but every once in a while something special comes in, like a fully restored 1972 HS30 Nissan Fairlady 240ZG... The shop owner had immediately started applying film to the windows as soon as it was in the shop so the interior was completely covered in towels and plastic sheets. But I could get a few photos of the engine bay which was restored like new. Such an amazing car to see in pristine condition in Japan these days.  
    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
×
×
  • Create New...