Jump to content
SAU Community

Recommended Posts

Hi, got some id1300s for my neo, but am having trouble getting them to fit. See pic (Plug base fouls on the manifold).

I was going to just grind a bit off the manifold but too much needs to be taken out.

Has anyone fit these type of injectors to a normal rb25 or rb25neo manifold.

On my old injectors the plug was more to the top.

post-78438-0-49129300-1442307488_thumb.jpg

They need spacers. These are pretty readily available. Those look like they are just the injector on its own. Pretty sure they need the smallest of the spacers, but top feed injectors in stock manifolds arent my forte

Scotty on here should be able to help you out. He will probably show up in this thread sooner or later

This is from a quick google search, bottom of the page. Click here

Edited by 89CAL

Cheers mate,

I have the height adapters for them to make them full length but they and most spacers go on the top of the injector?

Which doesn't help with the issue I'm having

Spoke to Scotty today, i may have to get him to make some spacers to go under the injector if i cant find anything else

Edited by Huzqld

Hmmmm I thought they made them for the bottom of the injector as well. But I may be wrong. They definently look shorter then my 1000cc's

I had a page with the pics of all the adapters etc attatched but cant find it. I may be talking complete rubbish though, Scott would know better then me

on a non neo you are required to fit an injector boss, which is just a metal spacer/o ring combo allowing the injector to be seated correctly.

Please don't go grinding anything.

That VPW fitting should work, I can get a hold of one and check it fits if you like, before you buy them, and work out what top spacer you will need too, as that needs to shortened by the same amount.

Thanks Scotty that would be great. Since I've organised the tuner for Friday it's all turned into a bit of a rush.. So I need to have them ordered early today.

If you've got one you can get hold of to check that would be awesome.

If I can't sort the top spacers out today I'll just space the rail up and sort that out after the tune

Thanks Scotty that would be great. Since I've organised the tuner for Friday it's all turned into a bit of a rush.. So I need to have them ordered early today.

If you've got one you can get hold of to check that would be awesome.

If I can't sort the top spacers out today I'll just space the rail up and sort that out after the tune

I just had the wholesaler flow test a 1650 shorty and you may have a problem with that idea. With that lower extension on the cone sprays out wide enough to hit the edge. It would have to be modified with a 45 degree chamfer, but this leaves the raw alloy exposed to the ethanol which is not a great long term option. It may get you by until you find a better solution though. Let me know if you want me to sort something out for you, I can probably make something up today and send the top and modified bottom extensions express.

Hey Scotty

I spoke to efi hardware, they have some adapters they Say won't affect the spray pattern, (they said the others do like you said)

and then I just run half height extensions on the top to make them full length

So hopefully that will work

*sorry short extensions on top

Edited by Huzqld

Hey Scotty

I spoke to efi hardware, they have some adapters they Say won't affect the spray pattern, (they said the others do like you said)

and then I just run half height extensions on the top to make them full length

So hopefully that will work

*sorry short extensions on top

You don't want full height, you need 3/4 height for the neo.

Man, this is getting crazy, an adapter on each end, full length, the injectors will move around too much for my liking... You really don't want them popping out while driving, they need to be firm so make sure you keep the rail height down to minimum.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
    • Wife and I are still looking for a new home. One condition was a large enough garage for a full-size lift in one bay. Now if only we could find something... We've been looking for almost a year now.
    • Thanks everyone for the ideas! Sadly, ramps are a no go for me. With young kids at home, I do most of my work late at night while they're sleeping. Starting the car multiple times wouldn't be a great idea.  I'll go see one of those new long reach low profile jacks and take a couple measurements to see if they will fit.   
×
×
  • Create New...