Jump to content
SAU Community

Recommended Posts

The motor I've received looks like they've been removed, so can someone confirm 100% if the 2 factory 2mm oil restrictors in the upper face of the block have any sort of check valve in or below them to stop the oil from flowing back when the motor is turned off?

Are the restrictors just pressed into empty oil way feeds with nothing below them?

One site says yes and must not be removed, but am also told nothing below them so no problem if removed and replaced?

Link to comment
https://www.sau.com.au/forums/topic/459798-oil-restrictors/
Share on other sites

No Czech valve.

Some people take out factory ones and tap in new ones. Others leave factory ones in and just hit new ones in over standard ones.

I left factory in and just hit my new (1.2mm and blank) ones into place. No oiling issues at all.

Link to comment
https://www.sau.com.au/forums/topic/459798-oil-restrictors/#findComment-7605931
Share on other sites

Blanked rear. Stock RB30E pump shimmed. Neo head. Fuel cell foam in both cam covers and enlarged drains.

I do not get a single drop of oil out of my cam covers. Not even an oily film inside the hose. That includes 7krpm track sessions.

Link to comment
https://www.sau.com.au/forums/topic/459798-oil-restrictors/#findComment-7606223
Share on other sites

So does it not make the top end run a bit dry when on idle and cruise considering stock is 2mm, in another thread someone mentioned after blanking the rear they developed a noise which might of been from it running a bit dry at the back, but im not sure that's enough evidence having only one person out of probably alot who havn't had issues.

Edited by AngryRB
Link to comment
https://www.sau.com.au/forums/topic/459798-oil-restrictors/#findComment-7606450
Share on other sites

XK, How does the 2.6 get away with only the one feed and the other blanked ?

Angry, From what I gather those running hydraulic lifters (GTST head) need to retain a larger oil feed to keep the lifters pumped.

A Neo being solid lifters doesn't require as much, aka RB26 style feed with one blanked

Link to comment
https://www.sau.com.au/forums/topic/459798-oil-restrictors/#findComment-7606544
Share on other sites

I have an RB30 with Nitto pump and use 2 x 1mm restrictors, no blank, by blanking one off you creat a air pocket under it

With the 26 head used, the 26 block has the rear one plugged factory so on 30 blocks using the 26 head you plug the rear one, Nissan sell the solid plug for around $5.

I never put the new restricor over the old one on a rebuild, in most cases the engine may have a history of a spun bearing, crud collects under the factory restictor so i run a self tapped screw into it and used a shifter under the head of the screw and knock it out so i can clean under the stock restrictor.

You would be surprised how much crap is under it.

photo(21)

Edited by GTRPSI
  • Like 2
Link to comment
https://www.sau.com.au/forums/topic/459798-oil-restrictors/#findComment-7606545
Share on other sites

  • 4 months later...
  • 3 months later...

Depends on pump and use

Haha yeah i have that exact link and printed out earlier today.. im using an N1 pump will be mostly street and odd track day so i thought blanking rear and 1.5mm in front would be ideal as stated. Will have extended baffled sump also and already have mines baffled rocker covers with custom baffled catch can (currently on my 26) aswell as getting the rear drain/vent on the rear of the head.. just wanted to see who would second my thought. Seeing that 26 factory is blocked rear and 2mm in the front
Link to comment
https://www.sau.com.au/forums/topic/459798-oil-restrictors/#findComment-7728689
Share on other sites

Haha yeah i have that exact link and printed out earlier today.. im using an N1 pump will be mostly street and odd track day so i thought blanking rear and 1.5mm in front would be ideal as stated. Will have extended baffled sump also and already have mines baffled rocker covers with custom baffled catch can (currently on my 26) aswell as getting the rear drain/vent on the rear of the head.. just wanted to see who would second my thought. Seeing that 26 factory is blocked rear and 2mm in the front

Forget the rear "drain" on the head - waste of time, money and space.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/459798-oil-restrictors/#findComment-7728784
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...