Jump to content
SAU Community

R33 Gtr Top Secret Style Rear Diffuser Fitment

Swole

By Swole,
in Exterior & Interior Styling

 Share

Recommended Posts

Swole Collaborator

Swole

Posted
Posted (edited)

Hey everyone,

Just wondering whether anyone's fit an R33 gtr top secret style rear diffuser on a 34, or even if they've fit one on a 33, just need some info on actually fitting the diffuser and flutes/pod itself:

1658969d56.jpg

If anyone has decent pictures of it fitted on their car so I have a rough idea on how to fit it, that'd be awesome

For example, pics of how it's mounted with the brackets under the car, how it's mounted on the front (where the diffuser comes up just under/on top where the number plate sits), how the diffuser is attached to the flutes/pods, etc.

Thanks in advance

Edited by Swole
75coupe Grand Master

75coupe

Posted
Posted

I got instructions with mine from psi parts, instructions were done up by pmr33 on here who fitted one to his 33...

I used flat aluminium 3mm bar to make brackets from

Swole Collaborator

Swole

Posted
  • Author
Posted

Thanks.

Mine came with brackets, however the brackets obviously only suited a 33 gtr, so i'll either need to fab some up or modify them

Are you able to take a closer pic of how it's attached in the middle section (where it's attached just under the number plate) if possible

I'm also after pics of anyone who's fitted them with the rear pods/flutes as well so I have a reference to how they fit

Cheers

AAARGH 33 Community Regular

AAARGH 33

Posted
Posted

I've got it fitted to my 33 gtst with the side bits. They indeed make it lower but I've moddified the front two brackets to bring it up higher. I'll see if I can get some pics.

Swole Collaborator

Swole

Posted
  • Author
Posted

The side bits when fitted make it sit really really low, i havnt seen them fitted before either

I've got it fitted to my 33 gtst with the side bits. They indeed make it lower but I've moddified the front two brackets to bring it up higher. I'll see if I can get some pics.

Yeah I can tell, most likely will need to raise my rears a little for them to fit haha

If possible, that'd be awesome

Thanks

IMACUL8 Veteran

IMACUL8

Posted
Posted

Is that this kit....

http://carbonplusoz.com/products.php?product=95%252d98-Nissan-Skyline-R33-GTR-Carbon-Top-Secret-Style-Rear-Diffuser-(3pc)

Hey everyone,

Just wondering whether anyone's fit an R33 gtr top secret style rear diffuser on a 34, or even if they've fit one on a 33, just need some info on actually fitting the diffuser and flutes/pod itself:

1658969d56.jpg

If anyone has decent pictures of it fitted on their car so I have a rough idea on how to fit it, that'd be awesome

For example, pics of how it's mounted with the brackets under the car, how it's mounted on the front (where the diffuser comes up just under/on top where the number plate sits), how the diffuser is attached to the flutes/pods, etc.

Thanks in advance

  • Like 1
Swole Collaborator

Swole

Posted
  • Author
Posted

If it helps:

20140119_103135_zpsnetkyzw0.jpg

Edit-3169_zps5bb485b5.jpg

Second photo its a bit out of whack though......

Thanks for that

Is yours just attached with a bracket (from what I can see in the second pic) to the pod?

Still looking for any pics showing how the diffuser sits/attaches with the flutes/pods that's included in my kit!

  • Like 1
AAARGH 33 Community Regular

AAARGH 33

Posted
Posted

So here's a pic of how it sits with the side bits.

I'll get some better pics in the light.

The side bits actually attach to my pods (I'll get a pic of them too). The only problem is that they stick out a bit further out than my pods because the diffuser is originally for a r33 gtr.

post-74314-0-49674200-1445684175_thumb.jpg

75coupe Grand Master

75coupe

Posted
Posted

That would be sitting crazy low at the front of the diffuser. I would of liked to have them on but getting over speed humps would of been impossible.

Im pretty sure i made extra mounting brackets, using 20x3mm alloy bar

Swole Collaborator

Swole

Posted
  • Author
Posted

So here's a pic of how it sits with the side bits.

I'll get some better pics in the light.

The side bits actually attach to my pods (I'll get a pic of them too). The only problem is that they stick out a bit further out than my pods because the diffuser is originally for a r33 gtr.

Looks good

Appreciate that

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • jtha7
      Replacing turbo water line - any recommendations or advice?

      By jtha7 · Posted

      Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • MBS206
      RB20DE NEO smallbox clutch.

      By MBS206 · Posted

      From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • MBS206
      Lock up the old for sale / wtb threads.

      By MBS206 · Posted

      That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      I hope that is not something that bad. From what i remember he said that only first gear is "hard" to get in and that he has couple of ideas what to try next but idk 😕  hope it is not gearbox out. I will let you know.
    • GTSBoy
      RB20DE NEO smallbox clutch.

      By GTSBoy · Posted

      If it's not the hydraulics, it is probably gearbox back out. Usually as per @Duncan's post, or otherwise associated with not getting the throwout fork positioned correctly. All the way up to catastrophically bolting shit back together without it being aligned properly and wrecking the clutch/input shaft/flywheel/something else.
×
×
  • Create New...