Jump to content
SAU Community

Recommended Posts

Have been looking for a consult 3 diagnosis at the Nissan dealer around my place and they don't have one, but still offered to come and try their tool...

Instead of wasting time with them, I'd rather drive to meet someone from here that has one.

We could probably have a list of everyone owning one here to save time for anyone else looking and make a few $ for the owners.

I'm personally looking around Sydney but if you have one, tell your State and diag tool so I can make a list.

Link to comment
https://www.sau.com.au/forums/topic/460608-consult-3/
Share on other sites

Nissan service department didn't have a Consult 3? I don't believe that for a second. Some other readers will work for engine diagnosis, not many will talk to all 8 ecu's.

I have one in Hampton Park, SE Melbourne, Victoria. :)

Link to comment
https://www.sau.com.au/forums/topic/460608-consult-3/#findComment-7626665
Share on other sites

http://www.plmsdevelopments.com/consult_if.shtml

Consult is an old plug interface, for older model cars. The M35 uses an obd2 plug but is not obd2 compliant, so you need the Consult 3 hardware Nissan use to read it properly.

Link to comment
https://www.sau.com.au/forums/topic/460608-consult-3/#findComment-7626686
Share on other sites

Nissan service department didn't have a Consult 3? I don't believe that for a second. Some other readers will work for engine diagnosis, not many will talk to all 8 ecu's.

I have one in Hampton Park, SE Melbourne, Victoria. :)

It's a garage that sells a bunch of car makes including Nissan and the guy I had on the phone told me they use a different brand of diagnostic tool and isn't sure they will be able to talk to the car (after I said it was a stagea..)

At $156/hour, I'm not too keen to go find out :D

ps: not sure why but can't edit my posts to update it :/

Link to comment
https://www.sau.com.au/forums/topic/460608-consult-3/#findComment-7626706
Share on other sites

well I've got a consult 3 in Sydney, happy to plug it in for only $155.99/hr.

Or for nothing.

BTW most generic scan tools at your average workshop should still work I think, the local place was certainly able to read my non-OBD2 Cima the other day

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/460608-consult-3/#findComment-7626900
Share on other sites

well I've got a consult 3 in Sydney, happy to plug it in for only $155.99/hr.

Or for nothing.

BTW most generic scan tools at your average workshop should still work I think, the local place was certainly able to read my non-OBD2 Cima the other day

That would be super cool, even for $155.99, rather give that to someone that has the right tools :)

Seriously though, had a transmission light turning on and since it's the TCU I want to read, would probably have more luck with a consult 3.

Happy to help with your $$ investment in the tool of course. PM sent

Link to comment
https://www.sau.com.au/forums/topic/460608-consult-3/#findComment-7626908
Share on other sites

well I've got a consult 3 in Sydney, happy to plug it in for only $155.99/hr.

Or for nothing.

BTW most generic scan tools at your average workshop should still work I think, the local place was certainly able to read my non-OBD2 Cima the other day

does your consult3 could communicate with HICAS computer?

Link to comment
https://www.sau.com.au/forums/topic/460608-consult-3/#findComment-7626910
Share on other sites

  • 1 year later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...