Jump to content
SAU Community

Recommended Posts

Hey Guys, I'm sure it's asked all the time but i'll ask again..

I have an S1 C34 RS4 Auto Stagea. Car was completely stock 170xxx K's, Only thing i added was a Pod filter.

I've replaced the spark plugs due to missfire and checked all piping etc to ensure not leaks.

I've been running it on 95 but i can only seem to get 260KM out of a full tank.. Usually a mixture or shorter trips and highway drive.

I'm not too hard on it, usually had OD on on highways etc, give it the odd squirt from the lights every now and then..

Can anyone suggest anything i should check or change to try and increase this? I plan to refit factory airbox and run on 98..



Also ever since i got the car it virtually always seems to be on boost.. If sitting on 50k or 90k even with OD on, slightest feather of throttle and its on boost straight away.. Or holding steady at 100k with OD its sitting on boost... Any ideas? I'm not sure what else to check..

Any advice would be great! Cheers

Link to comment
https://www.sau.com.au/forums/topic/460742-rb25det-consumption/
Share on other sites

Yeah correct plugs with 0.8 gap. I've just cleaned out the o2 for now and ill refit tomorrow to see if that helps

I believe it may have a boost leak, Sometimes it never comes on boost at all even with pedal completely to the floor.. It was sitting for 18 months before i had it with little to no maintenance so i'm not sure exactly what to chase

My bro's Stag always seems to be on boost too, one of the very first things I've noticed once we installed a boost gauge. Need to fully back off the throttle for boost to drop

O2 sensor did help but its still thirsty, probably less than 400km per tank. Weight and small capacity engine don't help I spose

You can see if the o2 is working with CONSULT, but if you cant get your hands on one of those just assume its dead, replace it, and reset the ECU so the long term fuel trims are re-established. Change one thing at a time and do the consumption calc over 3 tanks so its a bit more accurate (ie sum the liters and kms from three tanks together then do the calc).

Once you've done three tanks with the new o2, try 98 and recalculate over the next 3 tanks.

Dont forget to check the tyre pressure - 2psi over what the placard says is an ok start.

Dont run too thick an oil. 5w-40 or similar should work well.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...