Jump to content
SAU Community

R32 wreaking, all parts

boostn32
 Share

Recommended Posts

Chris32 Veteran

Chris32

Posted
Posted

door/window seals, will take them if you have them

any of those trim clips with the screw in the middle

upper dash vents (the de-mister ones that sit just under front window)

pm me or email me - [email protected]

Chris

AzzurrA Grand Master

AzzurrA

Posted
Posted

I'm chasing:

*a coilpack or 2 (will get back to you about that as i'm checking all of mine today) *possibly an AFM...

*also need the trim for inside the boot.

*Do Still have the stock airbox as well?

*Drivers side Dash vent that goes above the climate control

*Drivers Side A-Pillar cover (added)

what sort of prices are you looking for for the above?

EDIT: Drivers Side A-Pillar cover added

Rayage Contributor

Rayage

Posted
Posted

I'm after:

- front indicators l/r (hopefully u have the clear indicators)

- front light cluster l/r (after the projector lights)

- clear protective cover for instrument cluster

- centre vents

- stock gear knob

Is this a GTS-t or GTR you're wrecking?

Can you post pics of your parts to verify condition? Purchase will obviously depend on the condition of parts.

Pekatu Community Regular

Pekatu

Posted
Posted

I am after, the interior temperature sensor, the rear window rubber, rear pods, passenger aircon vent, vents that blow onto window (if they are still straight, not twisted due to the heat) and so you have any aftermarket parts, boost guage, boost guage pod???

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      RB25DET with solid lifters - which cams ?

      By GTSBoy · Posted

      I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • TurboTapin
      RB25DET with solid lifters - which cams ?

      By TurboTapin · Posted

      I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • foney
      Cheap Gtr For Sale

      By foney · Posted

      BRUH, one of the biggest mistakes of my life..... and i've had plenty ;[)
    • Kapr
      "Cheap" bolt on turbo on RB25DET NEO

      By Kapr · Posted

      @Murray_Calavera iam just considering options 🙂 of course it is very expensive so that why i ask here 🙂  @joshuaho96 I looked at that GCG hybrid(i remember looking at it few weeks before) So this is "that" hybrid where i send them my turbo and they upgrade the inside to Garrett stuff and then they send it back. It cost around 1200-1300 USD which is FAR cheaper than the HKS and it is what iam looking for(i just do not have experience like this...to send something off to "upgrade" ) @tylink720 that is like 150 USD turbo no? 😄 I dont think i have the "ease on my mind" with this kind of turbo. I just put over 7000k USD to "LINK" up my engine...dont want to blow it up with cheap turbo 😄     EDIT: https://www.cj-motor.com/gcg-turbo-charger-for-nissan-rb20det-rb25det-high?srsltid=AfmBOooVeOZ6CZ6r1AIv5m-KPaa6BvudIPJTY8LW78khkd-gQlsaCht9 I looked at this and it seems ok? It is that CGC hybrid and it costs around 1250 USD (with back shipping). Do any of you have experience with this hybrid on NEO turbo? I quickly look thru the forum/web and it seems very good.
×
×
  • Create New...