Jump to content
SAU Community

Recommended Posts

Thinking about getting rid of my dieselgate VW and picking up something a little more fun.

not looking to spend a fortune ($50-60k maybe a little more for the right car), and am thinking along the lines of;

2012 335i

2011 S4

2013/4 IS350 F sport

has anyone been down this track before and made a decision one way or the other?

Link to comment
https://www.sau.com.au/forums/topic/461163-335i-vs-s4-vs-is350/
Share on other sites

Dang, some seriously nice cars there.

I think I'd be leaning toward the S4. Its by far the more 'performance' of the bunch and, being 4 door, more practical than the BMW at least.

What model Dieselgate is it?

I would probably go the F30 4 door if i ended up with the 335 anyway, trying to convince myself they are also practical. I am leaning towards the S4 as well though.

I have the Passat alltrack, looking at your cars there i would say we are in the same boat?

I'm not sure whether to cut my losses and trade it in or to hang on and see what happens with the class action - i bought early last year RRP $58k and i am looking at about $27k trade in at the moment..

  • Like 1

I'm not sure whether to cut my losses and trade it in or to hang on and see what happens with the class action - i bought early last year RRP $58k and i am looking at about $27k trade in at the moment..

God damn thats painful!! I hurt for you. :(

dont go the audi. enough people around having issues or dealership woes or just maintenance in general.

Gotta agree here actually, Audi is just a VW in a diff skin anyway.

Test drove the Audi today - not as quick as i expected, still i think i will buy it tomorrow unless anyone really does know of any issues?

looks like they are easy to get some more power out of with a flash anyway:

https://www.revotechnik.com.au/datasheets/audi/revo-datasheet-audi-s4-b8.pdf

i have owned both Audis and BMWs forget about the 335i , get the E92 V8 M3 which has a bullet proof trans and engine .

Yeah there are a few floating around work, amazing cars - i just don't have the balls to turn up with a V8 given that they pay for my fuel and i drive a fair bit...

  • Like 1

Only interested in a sedan? Why not look at new golf R? would get it for 55-60, stage 1 tune and 283kw, 523nm 3.8 0-100 times. Then only uses 8L 100km too.

prefer sedan, i was looking at the new golf r wagon though - nice car but also not what I'm really after

The missus had an IS250 before, great car very reliable, a little under powered but if you get the IS350 should be fine. Never had a Audi so can't comment. Would stay away from BMW unless you really want it. We sold the IS250 and bought a BMW and the quality and reliability of BMW is not even close to the Lexus. The only upside with the BMW is the stock twin turbo v8 making over 400kw.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • FWIW, I've aerated oil, and cams snapped. You can figure out the rest 🥲
    • Depending on the hose, sometimes engine out is the easiest option  
    • Get an inspection camera up there. 
    • Yeah, but look at the margin in viscosity between the 40 and the 60 at 125°C. It is not very large. It is the difference between 7 and 11 cP. Compare that to the viscosity at only 90°C. The viscosity axis is logarithmic. The numbers at 90 are ~15 and ~35. That is about half for the 40 wt oil and <half for the 60. You give up viscosity EXPONENTIALLY as temperature rises. Literally. That is why I declare thicker oil to be a bandaid, and a brittle one at that. Keep the oil temperature under about 110°C and you should be better off.   Having said all of that, which remains true as a general principle, if you have indeed lost enough oil from the sump that the pump was seeing slightly aerated oil, then all bets are off. That would of course cause oil pressure to collapse. And 35 psi is a collapse given what you were doing to the engine. Especially if the oil was that hot and viscosity had also collapsed. And I would put money on rod or main bearings being the source of the any noise that registered as knock. Hydraulic lifters should be able to cope with the hotter oil and lower pressure enough to prvent too much high frequency noise, although I am willing to admit it could be the source.
×
×
  • Create New...