Jump to content
SAU Community

Recommended Posts

Just thought I have a bit of a brag session :D

Thanks to Carol Varga from Fullboost, I made the "TOUGHSTREET" section of DRAGS MAGAZINE Issue 4. It's only a little 1/4 page pic and blurb, but I'm still happy to see it in print :D All the figures (RWKW, ET and MPH) in the info blurb have now been superseeded too!

The mod info is a touch incorrect but that's mainly due to me not getting my arse into gear and detailing everything for Carol :D

Link to comment
https://www.sau.com.au/forums/topic/46119-15sec-of-fame-issue-4-drags-magazine/
Share on other sites

So let me get this straight Matt, you're in a magazine about drag, in the tough street section, and you're proud of it?

What colour dress were you wearing, it must have been sleeveless, showing off the guns to earn the "tough" part! :wassup:

Nah, just kidding mate, congratulations on being committed to print!

Thanks guys :(

No I wasn't wearing a dress Will, just leather pants and a fishnet vest :D

I had a good look through but I couldn't find Stacey in Issue 4, she may have been in an earlier issue, or the next one.

Dave Lee (Leewah) is also in the "TOUGHSTREET" section. My efforts pale in comparision to Dave's! 10.47 @ 140mph

EDIT: - Only too happy to help out Matty. Yeah mate number plates are blanked out :D So how did you go re g'box fix?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...