Jump to content
SAU Community

Recommended Posts

What's everyone do with seats in their M35? The standard ones look quite flat and not very supportive in corners. Anyone can confirm? So what would alternative options be? I take it theirs aftermarket rails so you could bolt in bride, recaro, sparco etc easily? Anyone know if V35, 350Z or any other performance Nissan seats would bolt in easily, whether using the stagea rail or the rail from the V35, 350 etc?

Link to comment
https://www.sau.com.au/forums/topic/461282-m35-seating-options/
Share on other sites

Ah yea pretty sure there's another guy with R35 seats Beregron or something like that I think. 350Z seats would be good if they weren't a huge headache. If they're a head then the gains aren't really worth it, probably better to go aftermarket

350z & V35 seats are the same design, you can get them in a bunch of different trims, material, leather, half n half and they are pretty much straight bolt in.

Biggest issue with my V35 seats was getting the wiring to work because the seats weren't electric beforehand but even that was a 15 minute job.

post-116816-0-68912300-1448508141_thumb.jpg

post-116816-0-93134800-1448508173_thumb.jpeg

I'm also looking at an M35 and wanted to look at options as I think the standard seats are probably fine and comfortable for the most part but I have a recaro in my current car and love how it hugs and holds me in. One look at M35 seats and you can see they aren't going to be amazing at holding you firm where you want to be.

Get it on the track or up in the mountains and you will be using your knees to hold your arse steady. You sit on the stock seats, not in them, and they are high enough that you stare at the rear vision mirror instead of the road. My seats dropped my arse at least 3 or 4 inches at a guess. I suppose it depends how fast you want to go around corners at the end of the day, and how tall you are.

Awesome, so all the bolt holes lined up?

Yep, lined up perfectly! No issues.

So why do people change there m35 seats? Are they just average or are you used to a different seat? Looking at purchasing a m35 I'm 6ft and 100kg. Is this a urgent change needed?

I'm 6'1 and not a light guy by any means, the stock seats although ok comfort wise are too high (head touches the roof) and have no side support, if you event half heartedly take a corner you'd slide everywhere. V35 seats are about 50mm lower and a hell of a lot more supportive.

Get it on the track or up in the mountains and you will be using your knees to hold your arse steady. You sit on the stock seats, not in them, and they are high enough that you stare at the rear vision mirror instead of the road. My seats dropped my arse at least 3 or 4 inches at a guess. I suppose it depends how fast you want to go around corners at the end of the day, and how tall you are.

For me its just below knees on outside resting against that pocket to hold myself gets annoying and sore after a while

Interesting you guys have trouble with height. I'm 5ft 10in and 92kg but I'm very short in the legs so have an upper body the length of someone about 6ft 2in, and I can get the seat low enough to have a decent amount of head room. My wife, who's only a fraction shorter than me (but in proportion so shorter in the body), jacks the seat up high and that starts to get tight but otherwise I've had no trouble with clearance. It took a while to get used to the base height after my Commodore but otherwise it's fine.

Maybe they changed for the facelift models?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
    • List all of your mods. It sounds like an aftermarket ECU hitting rev limiter. Like a valet mode, or a cold rpm limiter? 
    • @Kapr Haha yeah thats the one. I missed that you had a built up engine, I wouldn't want to run it on there either then. It was good in my situation just to replace the original turbo on a stock engine. @MBS206Yep definitely not a replacement for anything name brand
    • You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
×
×
  • Create New...