Jump to content
SAU Community

Recommended Posts

Which is why you use the manuals as a guideline and then physically check the vehicle yourself for any differences.

I've used the 2010 Coupe FSM for brakes, pulling apart the interior to upgrade the stereo, wiring diagrams, disconnecting harnesses between doors and main vehicle body. The only things I found different was the orientation of some of the harnesses because of the whole LHD/RHD thing, wire colours and a non-functioning pin 29 on the BCM which my alarm would've used for locking/unlocking the doors instead of the relay board I had to manufacture. Mechanically, with the exception of obvious LHD/RHD components (as in the steering mechanism), I wouldn't expect any other differences and would have 90% confidence in the manual, only being 100% confident once I've physically confirmed the specs before going shopping.

Brakes is one of those things where it definitely would not make sense to maintain a number of different varieties between regions, unless the Japanese wanted to be greedy and give themselves a completely unique system. Doing so would hurt their profits as it's yet another component they need to have someone do the tooling and manufacturing for. The more commonality they can have, the better it is for the manufacturer.

Plus, you also need to take into consideration design changes alone cost time and in turn, money. They're not going to have a design team slaving away on AutoCAD to create several variants of the one vehicle when just a few will do. Cost vs benefit and all that.

Anyway, the point I'm trying to make is, by all means, I encourage you to be wary but if you measure twice and cut once, you'll find just how much of a good friend that USDM FSM is. It hasn't failed me yet and I even did it for my old J30 Maxima when I was buying performance bits from the US for it, despite it being an Aussie model.

Okay so the rotors GSL sent me are 320mm (as ordered).

I started to get the jack out to take a wheel off and realised this would be a bad idea for my back injury.. so I'm gonna have to get a friend to give me hand later.

However, I did measure the thickness of the rotors and they seem to be around 31-32mm which would indicate they're the 330mm rotors... which seems odd for a 2009 sedan... I thought this was only a 2009 coupe option and sedans all had the 320's?

All the specs I've seen say the 320mm rotors are 28mm thick (as are the new ones) but my current rotors are definitely not 28mm.

As you can see, I don't have the Akebonos (attached)

I'm so confused right now.

post-525-0-19074900-1460970254_thumb.jpgpost-525-0-38025200-1460970262_thumb.jpg

Edited by GFXman

Did find this:

http://jp-carparts.com/nissan/part_detail.php?maker=nissan&type=196&cartype=13&fig=400∂=40206JK600&page=1&img=400A%20001

Which lead to this (330x32mm):

http://www.fitinpart.sg/index.php?route=product/product&product_id=290641

And also this one:

http://jp-carparts.com/nissan/part_detail.php?maker=nissan&type=196&cartype=13&fig=400∂=40206EG000&page=1&img=400A%20001

which lead to this (320x28mm):

http://www.fitinpart.sg/index.php?route=product/product&product_id=213953

So going by the part numbers it *appears* the 320mm comes on the Type-P (2008-2010) and the 330mm on the Type-S/SP (2008-2010) ?

This would align with my model car at least...

Does Nick have Type-P ?

Edited by GFXman

OK, let's take the guesswork out of this. Don't give out your chassis number in public but go to this site: http://nissan.epc-data.com/

Where it says "Enter full frame number", punch in your vehicle's complete chassis number/VIN. For example, KV36-xxxxxx

Then click on "Chassis and Transmission", followed by "Front axle (chassis)" and later "Rear axle (chassis)". Click on the rotor part and it will reveal the part number. If those part numbers equate to the 320mm discs, then the previous owner of your vehicle did a basic performance upgrade. If those part numbers do indeed equate to 330mm discs front and rear (of varying thickness though, I believe), then we know the JDM spec is definitely different to the USDM spec. Maybe excess stock of the old stuff before rolling on to the newer stuff in the later model vehicles?

Edit: What I'm curious about though is the specific manufacture details of your vehicle, which this site will reveal. That will confirm what type your sedan is, as in if it's a P, S, SP, etc as well as the manufacturing date.

For example, my CKV36 shows up with:

Frame / Series CKV36 / CV36 body C (coupe ) engine VQ37VHR (VQ37VHR type engine ) drive 2WD/4WAS (2 wheel drive with HICAS(4WAS) ) Production month 12.2008 grade 370GTSP (370GT TYPE SP) transmission 7AT (7-speed automatic transmission ) Interior color G Body color QAA Spec code COLD2, GLSSW, NAVI9

Tell us what you find with yours, as you've got me curious now. :)

Again, don't reveal your VIN to us, don't even copy the URL, which will have the VIN in there.

Edited by The Max

Interestingly that site (nissan-epc-data) doesn't include the Skyline Crossover Japanese variant... I can find the major chassis code in the EU section (j50) under infiniti EX35/37, but can't find the right spec.

Just interesting in that it's definitely not complete.

Cheers - N

Shit's getting weirder by the day.

GFXman, you're typing KV36-xxxxxxxx, as per the Nissan build plate, not the VIN from the Australian compliance sticker, right? They add a whole bunch of stuff in front which isn't a Nissan thing.

Etc-data can only decode vins upto Dec2008 and has not been updated past that so any vehicles Jan 2009 onwards won't show up...

How shite. I wonder if it was a lack of interest in the project or they later morphed it into another site and word never got out? Either way, sucks balls. Well spotted.

I'm guessing the Nissan Fast version (which is also available to download with similar limitations) that this site uses for decoding vin numbers was never updated, it is after all a free website or probably funded by amayama as you can order parts from them using the website.

  • Like 1
  • 1 month later...

Nick or Joolz, any update on this.

I did try to measure the rotors and it seems to be 330mm/32mm on a 09, 370GT type SP sedan. How ever i only have to replace break pads at the moment and going by what Joolz said, parts mentioned here from GSL wont fit in mine?

Hi All,

Sorry for being missing in action, been overseas...

I have returned home to this flurry of activity and been out to the garage to check...

Yes looks like my car has thick 32mm discs...

Turn the steering to full lock.... Grope around the back of the caliper...

Flipping heck.... :ohmy::angry2:

Someone has taken the second piston that was supposed to be in the caliper... Looks like the JDM Skyline 370GT S and SP have the same single piston front brakes as the 350 GT sedans...

GSL confirm that they have the correct pads off the shelf, but....

Not the correct discs...

They are working with DBA on the specs and hope to have an ETA soon...

Nick

Yeh I ended up returning the items I got based on Nick's specs.

GSL sent some new pads, REMSA this time, which will supposedly fit but I never got round to installing them as my car sold this week. They told me they "had them on the shelf" but was a load of BS; ended up taking 4 weeks to get them.

Anyway, I've given the new pads to the new owner and hopefully he'll be able to confirm with me if they fit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...