Jump to content
SAU Community

Stagea Not Abs 4wd Light On But No Flashing Led In The Boot ?

centoproject

By centoproject,
in Four Door Family & Wagoneers

 Share

Recommended Posts

Count Grantleyish Grand Master

Count Grantleyish

Posted
Posted

Hmm...

I've same issue with my R, I got 4wd light on as well.

Does your brakes make grumbling noise when you depress the brake pedals?

I've done some reading on/off for a couple of months, one possibility is the relay in abs unit that is fubar, haven't cracked mine open until I've sourced a replacement cos knowing myself, I'll break it.

centoproject Contributor

centoproject

Posted
  • Author
Posted

Hmm...

I've same issue with my R, I got 4wd light on as well.

Does your brakes make grumbling noise when you depress the brake pedals?

I've done some reading on/off for a couple of months, one possibility is the relay in abs unit that is fubar, haven't cracked mine open until I've sourced a replacement cos knowing myself, I'll break it.

Well thats the thing no definitive answer as to where the said abs relay is is it attached to the abs manifold ? or next to it and no grumbling just stuck in rear wheel drive and absolutely no sign of abs under heavy braking just slides can you take a picture ? or i can of my bay and see what you guys think ?

centoproject Contributor

centoproject

Posted
  • Author
Posted

Just to be sure you have topped up your brake master cylinder and attessa reservoir?

both topped up to the centre marks on a side note the clutch was recently changed could poor bleeding cause this issue ?

Count Grantleyish Grand Master

Count Grantleyish

Posted
Posted

Well thats the thing no definitive answer as to where the said abs relay is is it attached to the abs manifold ? or next to it and no grumbling just stuck in rear wheel drive and absolutely no sign of abs under heavy braking just slides can you take a picture ? or i can of my bay and see what you guys think ?

Yep, the relay is inside black box next to the manifold, it's pain in the rear to undo the screws and take the top bit out.

I'm the same, searched for a while with no definitive results.

centoproject Contributor

centoproject

Posted
  • Author
Posted

i have stripped mine down waiting for the replacements to drive now if this is the issue total cost to fix £6.10 still find it odd with no flashing codes on the module apparently if the relay is fubar it flashes pump failure or something along those lines :glare:

centoproject Contributor

centoproject

Posted
  • Author
Posted

Yep, the relay is inside black box next to the manifold, it's pain in the rear to undo the screws and take the top bit out.

I'm the same, searched for a while with no definitive results.

Right chaps just got back in replaced my relays with new ones not as hard as people say but to no avail still got the light on and still no flash from the brain when i turn the ignition should the relays click or prime the motor ?

Count Grantleyish Grand Master

Count Grantleyish

Posted
Posted

I did notice one of them are looking bit rough but mine happens when it's cold or when I've driven on speed humps bit quickly or into uneven road surfaces.

centoproject Contributor

centoproject

Posted
  • Author
Posted

have you got a standard ECU? I'd put a consult on it to get the error.

no its a mines ecu although i can't even find the socket even if i could would it read th abs or is it just engine side of things ?

centoproject Contributor

centoproject

Posted
  • Author
Posted

I did notice one of them are looking bit rough but mine happens when it's cold or when I've driven on speed humps bit quickly or into uneven road surfaces.

hmm i will attempt a continuity test ? where are the plug ends for the wheel speed sensors ?

centoproject Contributor

centoproject

Posted
  • Author
Posted

good news then, mines is just a standard ECU with a tune. the ABS might actually use separate pins to the engine data anyway.

ahh right that is good well am i correct in thinking that the com port for diagnostics is under the dash facing down just by the inner fusebox ? in that case mine is not there i will have a further look tonight

Count Grantleyish Grand Master

Count Grantleyish

Posted
Posted

hmm i will attempt a continuity test ? where are the plug ends for the wheel speed sensors ?

On the wheel well, follow the lines from sensors to the rubber grommet where it'll go into the engine bay.

I was told that it plugs there to the loom of some sort, haven't looked in detail.

centoproject Contributor

centoproject

Posted
  • Author
Posted

On the wheel well, follow the lines from sensors to the rubber grommet where it'll go into the engine bay.

I was told that it plugs there to the loom of some sort, haven't looked in detail.

okey thank you i will look tonight :glare:

centoproject Contributor

centoproject

Posted
  • Author
Posted (edited)

sorry yes forgot to add that bit, it is a grey or white plug near the fuse box.

eg{}:c[e]=d};var l=function(b){xpost-13070-1205647516.jpg.pagespeed.ic.&&0){for(var>

hmm interesting from memory my plug is not there also the fuse panel looks different hmm is yours an s2 ?

Edited by centoproject

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Wazmond
      Dumb rich kid tries modding for the first time

      By Wazmond · Posted

      Come to Eastwood, you'll get plenty of that 🤣
    • soviet_merlin
      RH9 R32 GTR Build Thread

      By soviet_merlin · Posted

      Oof, I will forevermore have those shredded gears in mind whenever someone talks about showing mechanical sympathy towards their car. Thanks for the photos, fascinating stuff!
    • Dose Pipe Sutututu
      RH9 R32 GTR Build Thread

      By Dose Pipe Sutututu · Posted

      Curious to see how the SpeedTek stuff holds up
    • OST Micah
      RH9 R32 GTR Build Thread

      By OST Micah · Posted

      The holdups last year were drivetrain related. I had the car out right after getting the bearing issue resolved. Third launch and the car didn't move after releasing the clutch. It had sheared all the engagement teeth off the 1st gear.    Thankfully no other damage was done. I set an aftermarket gear beside an OEM gear and found that the engagement teeth on the OEM gear were much larger and better supported. Looking through my bin of spare transmission gears I found that there are two types of tooth on the OEM first gears - the larger tooth and the smaller tooth. It looks like most aftermarket gearset manufacturers base their design on the smaller tooth. OEM large tooth left - Speedtek, OS Giken, etc or OEM small tooth right Decided to give that larger engagement tooth a try. Pressed the ring off an OEM gear and sent it to a transmission manufacturer here in the States. They did their "faceplating" operation with my synchro ring on the Speedtek gear.   I reassembled it, took it back to the track and promptly destroyed the gear itself.  I'll rebuild this and use it as a spare - thankfully just first gear and the countershaft are damaged beyond repair. Definitely disheartening but my welded on engagement tooth ring held up!  Moved to Speedtek's dog engagement design as the gears appear to be much stronger. So far they have taken much more abuse at the track. Also scored a Stillway lockout from the Netherands for super cheap. It's for some other RB transmission so it took a bit of fabrication to fit but honestly a very easy job. I also had to heavily modify the gates as they were very different.   Then for some reason at the last test and tune a silicon coupler below the throttle blew off and took out the radiator and fan. Thankfully it was in the burnout box and not down track. This car is really beating me up - I still haven't made a pass in it. Ran it through the gears many times on the street but it keeps biting me at the track.  Currently in the process of replacing the radiator and remaking the throttle pipe to remove the coupler and use a cast 90 and a vband. I WILL get this thing down the track...
    • Ozdavroz
      Dumb rich kid tries modding for the first time

      By Ozdavroz · Posted

      Covers most of the above points really. There's a few exceptions but most just see driving as an irritating but necessary task they must complete if they want to get anywhere on time. Also see it as a good time to show their awesome multi-tasking abilities on their mobile and/or doing their makeup.  
×
×
  • Create New...