Jump to content
SAU Community

Recommended Posts

Im not discrediting their work, i am letting you know from my experience (take it or leave it). Im all for supporting local business but just giving you the heads up these vq low rev engine sounds are bloody loud (especially in the cabin) where you will be on a constant dose of panadol for the headaches.

I have spoken to one of the local m35 owners here in brisbane about his experience and he mentioned he changed to a diesel muffler and had it sticking out a little more from the rear of the car so the exiting noise was past the rear of the car not under it. Happy trails with you're shop just food for thought.

You're comment sounded like me a few years ago. Now i have a exhaust that was made for the nm35s.

I always appreciate the information and opinions.

I ran an N1 exhaust first on my M35 but went fully custom due to the drone and have had custom for the last year and a half. Compared to what i have heard on youtube clips etc i would hardly call mine droney or loud in comparison but then again my experience with M35's is fairly limited to 3 owners cars.

I may regret not going for a Fujitsubo this time but i'll try and post a clip once mine is sorted for science.

Diesel mufflers are pretty much larger cylinders with a perforated hole pipe that's straight through. Some glass packed or not. Most of the mufflers off the shelf have baffles or loops inside (don't get me started on bullets and cobys). Effectively just makes it like the branded ones without the label price. Cut one open

Edited by Reaperblitz

"if made badly or ignorantly"

I am getting a new exhaust made in the next few weeks. I'll try and post up how it sounds when done. I guess i could have just gotten a new dump / flex and joined the Fujitsubo crew but i like tackling things my own way with what i have at my disposal locally. Support the locals folks :)

If the bloke i am using's other work is an indication of what i'm in store for it should be a nice bit of kit.

You'll have much less of an issue with the drone situation with the manual conversion; which is yet another good thing to add to the enormous list of good things about manual cars... :cheers:

  • Like 2

I have Bricks intake now.

Haven't fitted yet, gees imagine would probably be over 120db.

Video coming soon of my Fuji with single cell cat.

My work associate said he could hear me for a good minute before I pulled up to site.

I like the look of that silencer, looks smart.

If the new cat doesn't bring it down enough I might try one of those.

That doesn't sound like any Fujitsubo I have heard under load.

Does it look like it has been tampered with? Resonator still intact? Maybe the rear muffler has been gutted of the baffling by the previous owner?

  • Like 1

That doesn't sound like any Fujitsubo I have heard under load.

Does it look like it has been tampered with? Resonator still intact? Maybe the rear muffler has been gutted of the baffling by the previous owner?

I was going to say; mine sounds nothing like that.

That has a rasp that is completely absent from mine.

Is there a cat fitted?

With a sound meter phone app (no guarantee of accuracy) mine only registered 90dB at peak (free rev).

But even allowing for error; there's no way known that it would be 107dB, I have mates with bikes around 104dB, and they are orders of magnitude louder than my quiet ol' Fuji.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...