Jump to content
SAU Community

Recommended Posts

Hey all

Recently my brother has bought a R31 station wagon.

Started its life as a non turbo, but has been converted on the same non turbo block to a turbo.

does it have to go through regency now?

Can i just tell motor reg its now a turbo?

Will the insurance company be ok with it being a turbo?

cheers

Link to comment
https://www.sau.com.au/forums/topic/462387-legality/
Share on other sites

I was surprised about a year ago when I found that SA Transport webpage does now list guidelines on modifications, and what is and isn't illegal. For this particular change - adding a turbocharger:

https://www.sa.gov.au/topics/transport-travel-and-motoring/motoring/vehicles-and-registration/vehicle-standards-and-modifications/aftermarket-components

Turbo-charging/supercharging petrol engine vehicles

Turbo-charging or supercharging an engine increases the power of the engine and may increase the exhaust emissions, fuel consumption and reduce the service life of the engine.

Passenger cars and passenger car derivatives (car type utilities and panel vans) manufactured prior to 1 July 1976 and fitted with petrol engines can be fitted with a turbocharger or supercharger to the original manufacturer's engine without DPTI approval.

For cars manufactured on or after 1 July 1976 the fitting of a turbocharger or supercharger requires one of the following:

  • the vehicle is fitted with a Second Manufacturer's plate to demonstrate compliance with all Australian Design Rules
  • the vehicle to pass an IM240 emissions test
  • the converted vehicle is identical to the production turbo/supercharged vehicle.

In all cases a statement of requirements is required and the vehicle must pass a roadworthiness inspection.

Certification from a professional engineer may also be required. See list of qualified engineers recognised by DPTI - MR426 Chartered Professional Engineers 409.4 KB .

I'd imagine these sorts of engineering changes would include checking over whether the brakes are adequate, any changes to the fueling system are within specifications, that adequate exhaust & emissions systems are in-place, etc.

Link to comment
https://www.sau.com.au/forums/topic/462387-legality/#findComment-7670660
Share on other sites

  • 2 weeks later...

I thought the general consensus with these cars was to keep N/A's that way, as they're then still P-plate legal, and those are in-demand. Also - the cost, engineering, legalities, and extra police attention of a converted car (and they're probably worth less than a factory turbo, or plain N/A) making it generally better to just buy the turbo car instead.

Link to comment
https://www.sau.com.au/forums/topic/462387-legality/#findComment-7677510
Share on other sites

I thought the general consensus with these cars was to keep N/A's that way, as they're then still P-plate legal, and those are in-demand. Also - the cost, engineering, legalities, and extra police attention of a converted car (and they're probably worth less than a factory turbo, or plain N/A) making it generally better to just buy the turbo car instead.

Yes, i thought so too. But people still want to do it for some reason..

I guess for them its not about the money or the legalities its about the project, and they can then complain about the whole process and unwanted attention.

Link to comment
https://www.sau.com.au/forums/topic/462387-legality/#findComment-7677574
Share on other sites

Yes, i thought so too. But people still want to do it for some reason..

I guess for them its not about the money or the legalities its about the project, and they can then complain about the whole process and unwanted attention.

Only makes sense if u have a wreck that u got for fu*k all with all the required parts to raid. Still lots of work though. I still wouldn't do but each to their own.

Link to comment
https://www.sau.com.au/forums/topic/462387-legality/#findComment-7677602
Share on other sites

Ya I understand what you guys are saying iv had my car for 6 years since on my L's and know that I can drive a turbo I was going to turbo it it more because I have spent a lot of money on it makeing it look they why I want it to look and have growin a attach meant to it and don't think I could sell it I pretty much have all the stock parts to turbo it so know it almost time to take it to the machines to get down

Link to comment
https://www.sau.com.au/forums/topic/462387-legality/#findComment-7678018
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • So for the wide band is a Bosch 4.9 correct for the Link G4+ along with a Can bus? Just get the Link gear or is generic ok too? Eg here: LINK LINK DIGITAL WIDEBAND CAN MODULE WITH BOSCH 4.9 SENSOR : KYP Performance House  
    • Bit difficult to follow. Have a look below and see what the standard R32 layout was like. Note there was a restrictor in place immediately before "turbocharged pressure control solenoid" that, if removed, magically got you 1 bar boost.
    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
×
×
  • Create New...