Jump to content
SAU Community

Recommended Posts

I am slightly obsessed with the idea of this for some reason after selling off my ARC box to go back to stock (with Apexi panel filter).

http://www.rhdjapan.com/nismo-rb26dett-engine-parts-r-tune-air-cleaner-duct.html

Has anyone ever done a back to back dyno test vs the stock snorkel? I'm interested if it makes any different what so ever.

Car will be running -9s on stock intake piping. I'm mostly interested in response.

Edited by ActionDan
Link to comment
https://www.sau.com.au/forums/topic/463042-nismo-r-tune-intake-duct/
Share on other sites

Fair assumption, but what I'm after is someone who has done a real world test.

I can't deal with the what if lol

I was also considering buying one then making a mould so we can all just ave one because it looks nice :D

  • Like 1

For all that hectic track work I'll be doing.

I knew I'd get these responses from the usual offenders, but I'm still holding out hope that someone has actually tested this.

If for no other reason than my satisfaction.

For all that hectic track work I'll be doing.

I knew I'd get these responses from the usual offenders, but I'm still holding out hope that someone has actually tested this.

If for no other reason than my satisfaction.

:/

It's got nothing to do with track work.

For what it's worth you'd be better modifying the two pipes that bolt to the compressor housing instead of the snorkel.

The snorkel from the guard to the airbox, has that been opened up?

I think people who bought this didn't do it for power gains.

Think of it this way maybe, the hole in the airbox is still the same size. So it's like putting a funnel on a straw in a way

I'd say the chance of someone doing a back to back dyno run after a cosmetic change would be slim...

I've seen people refer to it as a visual mod as well which makes me wonder where Nismo gets this from?

"The NISMO Air Cleaner Duct Reduces Compressor intake pressure by 30 percent at the moment of boost pressure, also decreases air-path pressure."

:/

It's got nothing to do with track work.

For what it's worth you'd be better modifying the two pipes that bolt to the compressor housing instead of the snorkel.

The snorkel from the guard to the airbox, has that been opened up?

Then what? Avoiding exploding diff/ruined sump?

The rubber intake pipes or the metal pipes that connect the twin turbo pipe to each comp housing?

Guard port is opened.

I've seen people refer to it as a visual mod as well which makes me wonder where Nismo gets this from?

"The NISMO Air Cleaner Duct Reduces Compressor intake pressure by 30 percent at the moment of boost pressure, also decreases air-path pressure."

Then what? Avoiding exploding diff/ruined sump?

The rubber intake pipes or the metal pipes that connect the twin turbo pipe to each comp housing?

Guard port is opened.

3b8a7cc2.jpg

40a126ad.jpg

59be22eb.jpg

b636d8d4.jpg

7eb57f61.jpg

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...