Jump to content
SAU Community

Recommended Posts

Hi guys up for sale is my 1990 r32 gtr in black pearl metallic have owned the car for just about a year but it's time for it to go it's currently sitting on club registration

Okay time for the specs

ENGINE:

Has had a rebuilt engine have a receipt of it from previous owner

Nistune Ecu

Garret 2860-7 turbos

Tomei dump pipes

Custom havoc 3-3.5inch front pipes

Tomei 260" pon cams

Tomei cam gears

Splitfire Coilpacks

Apexi pod filters

Venom high flow cat

Varex open close exhaust tip welded onto a jasma exhaust

1000cc Bosch injectors

Walbro 400LPH fuel pump e85 rated

Car is currently running at 337kw on e85 tuned at racepace Motorsport

Wheels: current wheels are work emotion xXD9 18x10-15 all rounders with federal 595rsr tyres with around 70% tread ,for brakes it's running DBA street rotors along with project mu HC800 pads

Suspension: BLITZ ZZ-R coilovers

INterior: nismo 320km cluster the kms have stopped but recent rebuild makes it obvious it's only around few thousand Kms ,

Nismo gearknob

Now time for the bads:

Needs a new thermostat fan unit for the fan speed controller

New heater core

Has the usual dints from mechanics jacking under the skirts

Driver side seat has a small rip

Has the usual passenger side bubble

Has the usual small scratches post-135838-14567086590599_thumb.jpgpost-135838-14567087012727_thumb.jpgpost-135838-14567088110593_thumb.jpgpost-135838-14567088417368_thumb.jpgpost-135838-14567088667952_thumb.jpgpost-135838-14567088946231_thumb.jpgpost-135838-14567089172278_thumb.jpg

attachment=503708:ImageUploadedBySAU Community1456708514.935154.jpg]post-135838-14567085536203_thumb.jpg

post-135838-14567086166079_thumb.jpg

Currently asking for 27k slightly negotiable any reasonable offers will be accepted low BALLERS will be ignored

Feel free to text me on 0412510883

Location Narre warren melbourne victoria post-135838-14567090315082_thumb.jpgpost-135838-14567090423734_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/463314-r32-gtr-for-sale/
Share on other sites

  • 4 weeks later...
  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...