Jump to content
SAU Community

Recommended Posts

I have a confession to make .. once I sold my C34 I didn't keep up with the Stagea models and trends. :( I have no idea about the M35.

Help me try to convince my wife that a Stag is the best family car option.

Likes;

Bluetooth

Screen / reverse camera

Black leather

Front power seats

dual sun roofs

Must haves;

4wd

Power! I notice that the 25t and 35 n/a are similar numbers - is that right? We don't necessarily need turbs so i'd be happy with 3.5 (assuming 350Z / Maxima donk?)

Good towing ability (Do many come from Japan with factory towbars?)

Do any come with 7 seats?

This is to compete with local Liberty, Kluger etc.

Would like to stay under 25k.

What do you think?

Do we have an M35 model differences thread? (for model equipment/features, not necessarily mechanical differences.) I'll add/update one if we dont have one.

C

Link to comment
https://www.sau.com.au/forums/topic/463351-m35-model-differences/
Share on other sites

An M35 Stagea is the best family car option. It's true, you read it on the Internet.

4WD: Check. Available with 2.5 turbo and 3.5 NA.

Power: Check. Available with 2.5 turbo and 3.5 NA. Lots of 2.5 knowledge on here, 3.5 knowledge is worldwide due to 350Z/G35 link. Popular consensus is 2.5T has more torque and slightly better performance stock but 3.5 is no slouch and a nicer place to be.

Good towing: This is a sticking point. Some have torn rear subframes towing heavy loads, other pull car trailers with no issues. I suspect it comes down to how the bar is mounted but I'm nowhere near qualified enough to speculate. I had a towbar fitted to mine when it came into the country but I only use it for lighter loads (<750kg total) and have a Commodore for heavy stuff.

7 seats: I haven't seen one yet, given the rear layout I can't see how one would work.

Under $25K: Pass. In NZ you'd struggle to pay half that for a decent one. Most expensive M35 on TradeMe at the mo is $NZ14,995 but he's dreaming for the spec.

Specs: Go for broke: http://specs.cars-directory.net/nissan/stagea/2001_431/ - Please buy a 350S. Please.

Considered stuff like the 370GT Crossover? Probably over budget though.

  • Like 1

Thanks Hertz.

The towing is usually light. We take a trailer camping with us for bikes, kayaks, tents etc. Currently the Passat doesn't even hiccup and besides the odd small jolt or noise from the back you'd have no idea it was there. This is what I'm looking for. Obv's if I hooked it up behind my Mazda 3 there'd be more tell tale signs that it was there. I reckon its always < 750kg. Def not towing boats or caravans.

7 seats is not a deal breaker. It'd be good for the odd scenario where grandparents and kids want to come.

The Axis looks the business, but the interior is a little loud. I'm sure I could replace the wood grain with back (I did that in My Bora. Best thing I ever did to it) but the seats are just a bit much. Do any Axis' come with black interior?

Do they all have screen / reverse / bluetooth ?

Screen / reverse camera was a factory option for M35's.

Bluetooth was not, but can be implemented a number of ways - new stereo being the most expensive, Grom units are cheap and run flash drives for music although they have do seem to have considerable echo during phone calls, or you could just get a generic bluetooth unit as you would with any car that does support it).

If your budget is anywhere under $25k, go with the PNM35. Much nicer car and if you do need more power than standard, you can throw some cash at it with a bolt on turbo/SC kit I suppose.

The only alternative I really see for the price would be a VE wagon.

  • Like 1

Do they all have screen / reverse / bluetooth ?

If it helps, I just installed a new head unit in my M35, cost me $120 for the unit, another $40 for harnesses, and took me a couple of hours of fiddling to get the job done (first time cracking the dash open). Includes Bluetooth music and phone calls, as well as complete hands free control if you are a smart (read: Android) user. Bottom line is that the factory Bose speaker aren't too bad, and a new head unit isn't as scary as people seem to think it is.

  • Like 1

If it helps, I just installed a new head unit in my M35, cost me $120 for the unit, another $40 for harnesses, and took me a couple of hours of fiddling to get the job done (first time cracking the dash open). Includes Bluetooth music and phone calls, as well as complete hands free control if you are a smart (read: Android) user. Bottom line is that the factory Bose speaker aren't too bad, and a new head unit isn't as scary as people seem to think it is.

What unit is it? Got a link? (Yes, I'm a smart user :thumbsup:)

I'm pretty sure this is it, I got it on special though. If you didn't live in Sydney, I'd happily drink a beer and point at screws you need to undo.

https://www.jbhifi.com.au/gps-car-audio/kenwood/kenwood-kdc-u563bt-200w-mp3-cd-tuner-with-usb-ipod-bluetooth/694636/

The Aerpro harnesses you can get at Autobarns/Ebay, whichever is your fancy, but don't forget to get an aerial adapter as well. This unit won't play CD's, either, but, who the heck uses CD's anymore, amiright?

Of note, Series 2 M35's don't come with a single DIN stereo.

As such, you would need the double DIN interior pieces and either a double DIN unit or the possibly the single DIN cradle from a series 1 M35 as well as as the double DIN interior pieces for the series 2- not that I have seen anyone do this conversion as yet, but I must say that I quite like the idea...

  • Like 1

Of note, Series 2 M35's don't come with a single DIN stereo.

As such, you would need the double DIN interior pieces and either a double DIN unit or the possibly the single DIN cradle from a series 1 M35 as well as as the double DIN interior pieces for the series 2- not that I have seen anyone do this conversion as yet, but I must say that I quite like the idea...

I happen to know that a mob in Campbellfield has a Stagea sitting in the front yard that has been picked clean, save for the dash that includes two single din slots. Mine bolted straight in, and I have the same set up. At least, I'm pretty confident I saw that, I just took the window washer bottle and ran back to the mechanic. Give them a shout:

http://www.gumtree.com.au/s-ad/campbellfield/wrecking/bb-auto-parts-wrecking-2002-nissan-stagea-m35/1106007411

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To expand on this to help understanding... The bigger/longer the block is, the more it's going to work to sit on your far away high areas, and not touch the low stuff in the middle. When you throw the guide coat, and give it a quick go with a big block, guide coat will disappear in the high spots. If those high spots are in the correct position where the panel should be, stop sanding, and fill the low spots. However, using a small block, you "fall off" one of the high spots, and now your sanding the "side of the hill". Your little block would have been great for the stone chips, where you only use a very small amount of filler, so you're sanding and area let's say the size of a 5/10cent piece, with something that is 75*150. For the big panel, go bigger!   And now I'll go back to my "body work sucks, it takes too much patience, and I don't have it" PS, I thought your picture with coloured circles was an ultra sound... That's after my brain thought you were trying to make a dick and balls drawing...
    • Oh I probably didn't speak enough about the small sanding block for blocking large areas.  In the video about 3 minutes in, he talks about creating valleys in the panel. This is the issue with using a small sanding block for a large area, it's way too easy to create the valleys he is talking about. With a large block its much easier to create a nice flat surface.  Hard to explain but in practice you'll notice the difference straight away using the large block. 
    • Yep I guessed as much. You'll find life much easier with a large block something like this -  https://wholesalepaint.com.au/products/dura-block-long-hook-loop-sanding-block-100-eva-rubber-af4437 This is a good demo video of something like this in use -    You have turned your small rock chip holes into large low spots. You'll need to fill and block these low spots.  It's always a little hard not seeing it in person, but yes I would go ahead and lay filler over the whole area. Have a good look at the video I linked, it's a very good example of all the things you're doing. They went to bare metal, they are using guide coat, they are doing a skim coat with the filler and blocking it back. If what you're doing doesn't look like what they are doing, that's a big hint for you  
    • The odometer does go up when driving.  Does this tell it is an issue with the speedometer itself?    Where can I look for replacement cluster? Or speedo? I can likely do the repair.. Will ER34 cluster work on HR34? Or do I need a HR34 20GT S2 specifically lol   
    • Mine's a bit bigger at 70x150mm roughly. The spots are flat, just can feel the edges if I dig my nail into it. I did fix some other other ones by both using my finger to sand that small spot (I'm a bit wary of doing this and creating hot spots and a bigger mess) and I also did sand over it flat and others, but this also worried me a bit because if I create an overall low spot on the panel on paint that is good.  Correct me if I'm wrong but as long as it's flat even if I can feel the edges, I can put filler because it will all be level once I sand it? I can see myself going in a circle after sanding guidecoat with 320 grit if for example the panel is flat with my hand but because I sanded the guidecoat I could have created a low spot again somewhere. Unless where I'm going wrong is what I mentioned previously where I didn't go low enough on the grits. It's 1 step forward and 2 step backwards here haha. I'll probably need to experiment with it more. Last time I go back to bare metal lol.
×
×
  • Create New...