Jump to content
SAU Community

Recommended Posts

I had recently changed my timing belt and water pump ect. And when I started my car it started fine and revved out fine and idled awesome. Although when I let my clutch out all the way in neutral it starts making a really wierd ticking noise I have no idea what it is any thoughts or ideas?

Link to comment
https://www.sau.com.au/forums/topic/463642-timing-belt-replaced/
Share on other sites

Sooooooo you put the clutch in and now that you have released it there is a ticking noise?

Is the noise coming from the timing belt area or the rear of the engine?

Does the noise change with RPM?

Is the idle now odd?

Need much more information to diagnose things over the internet

It actually sounds like it is coming from the front of the motor near the timing belt, the idle is the same it just ticks and the pitch defiantly changed of the tick when revving but revs normal. I don't have it on ramps but thanks for checking.

Is your CAS on the way out? Mine made weird noises when i put the timing cover back on and could not work out what it was. Thought the belt was rubbing because with the timing cover off it sounded ok

Turned out my CAS bearing(s) were shot. When you pull the CAS out turn it you will soon know if you have the same problem as me. Should spin nice and freely. Mine was hard to turn by hand

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...