Jump to content
SAU Community

Recommended Posts

  On 23/03/2016 at 10:43 AM, conan7772 said:

I had no cat on my Legalis R when I bought the car.

Fitted a 100 cell cat, couldn't notice any loss in power at all (under 5000 rpm )

Also the cat didn't make it any quieter really. Maybe 3-5 dB

Just want it to be legal, plus bonus bung for tuning.

Still over 110 dB.

Over 110db is illegal, right? Whatever you have cat or not. But de-cat is another reason for defect

I know you've already bought your exhaust but the Legalis is the best sounding exhaust for the m35

Purely sexual I tell ya !!

It does flow cause I managed 317kw with a decat front pipe

Very quiet no drone inside the cabin

But loud when you get on it

  On 28/03/2016 at 1:50 PM, joshm35 said:

Make sure to get the kakimoto silencer (62mm).

that's in my shopping cart. is there much difference with/without silencer?

i saw it is 42.7mm, not 62mm?

post-137368-0-55281100-1459206404_thumb.jpg

post-137368-0-10797400-1459206407_thumb.jpg

Edited by YangLIU

Yes there is a difference as with the 42.7mm you are actually restricting the flow where as the 60.5 mm silencer (SIS090) is actually the same internal size as the exhaust internal so no flow is restricted. You will need to cut a small amount from the end to allow to fit. I will try and find a pic for you to show

  • Like 1
  On 28/03/2016 at 11:23 PM, joshm35 said:

You need to cut of 32mm of the inner pipe to fit flush. Are you on face book ill tag you in my post.

ordered SIS090 today with special sound absorbing cotton ring to reduce the drony.

post-137368-0-10270200-1459237534_thumb.jpg

post-137368-0-82014800-1459237534_thumb.gif

post-137368-0-71093600-1459237537_thumb.jpg

NIS001 is 135mm length, SIS090 is 220mm. i would like to cut 85mm on SIS090, this could make the exhaust air go into the small room then out to atm, like a smaller muffler.

post-137368-0-03705800-1459238142.jpg

Edited by YangLIU
  On 29/03/2016 at 12:39 PM, joshm35 said:

Yeah i dont understand the need for the cotton donut....

The silencer works as the exhaust gasses now exit further towards the rear of the muffler thus less space for noise?

  On 29/03/2016 at 8:02 AM, Ben C34 said:

Wow. That cotton ring will do shit all. As will your small gap plan

I'm betting on it. 5 bucks. Cash.

here is a video for that cotton ring. not sure if it is sure.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I havent bought a manual cover for the dash yet and no cluster change, won't bother me too much, I just need to get that auto box gone, manual in! I miss my manual. 🤪. We started last weekend and managed to get the box out. Planning to start putting it in this weekend and then order a single piece tail. We were super careful to take time and not damage anything. It's my first time working under the car.  With my S15 mainly worked in the bay. This time, it was a headache because of three or four bolts only. They simply didnt want to leave thei homr and the one securing the tailshaft, another above the GB, and the one securing the lipstick was a shit. Mates mate, Davo caught fire 🤣, nearly opened his chest up with a grinder 🤦🏽‍♂️ and both mates nearly had a plate from the box land and slit their head open. Fun times. We all survived. Not the easiest working with limited access on jackstands. As I'm sure we can agree these are the memories which make us love our car. For all three of us, was an awesome weekend and Sunday 3.30am before tools down was a fantastic effort. I need to upload pics, but looks like it needs to be via Url now. We used to be able to just upload pics back in the day. It's been that long! 🤪 Im currently spraying rustoleum under body, not because it's rusted. It's super clean, but just so it's protected for the next 10 years. There was a few surface rust spots. Which pretty much wiped off with a 3M scourer.  Really impressed with how well the previous owner maintained it. Bank account went down so quick! Service, then GB - managed to get a spanking new 34 genuine box from Nissan. All the rest of the conversion parts from Kudos.  Went with a Nismo short shifter. New pedals and Exedy Clutch and FW. Ordered the Prp Rear Main Retainer kit which should arrive Friday and my first engine mod part just like I did with my S15 will be the Tomei Expreme Turbo Outlet. Already on order. It'll likely sleep next to me on a pillow during the coming months. 🥰 Last build was on my JET200GT profile and on SAU and Hardtuned I had documented the build. Planning to try to do that again. Brands feel scarce now. Wish we still had ARC and Apexi parts readily available. Exhaust - need some advice on this. I had an Apexi exhaust on the S15 and loved the tone. My mate had a HKS HP Silent on his 33 and suggested I go with that to avoid drone. I can't remember hearing an RB25DET running that so will likely need to wait for a meet or something to hear it.  Not after big power, just enjoy building it, and drivability with minimal negative attention.
    • Have a chat with Ben at Moore Performance or Jesse at JS Performance.
    • Thanks both. All good advice. Reminds me of drilling through stone wall for drainage pipe 😬 I'll let you know how I get on if I still have use of my hands afterwards 😅
    • Finally got shipping number for the intake and throttle body, shipped by UPS, so "should" be in my hands sometime next week, fingers fracking crossed
    • I'm so far behind in the jobs I have to do at both work and home (including car) that I have become immortal. There's simply no way that I can die now.
×
×
  • Create New...