Jump to content
SAU Community

Recommended Posts

I am considering taking my 6spd RZ Supra (240rwk) :wassup: on the track, I have adjustable height suspension, front and rear strut tower braces and good tyres but was just wondering how Supra's in general go on circuits. I hear lots about them in Drags but not so much on the track. Anyone seen em on a track or even raced against em? Obviously a lot is going to come down to the driver but I'm just curious on your opinions...

Also what kind of modification to suspension/handling are usual for track work?

B :throwup:

Link to comment
https://www.sau.com.au/forums/topic/46446-supras-and-circuit-racing/
Share on other sites

Hardly see any at circuits when I come to think about it.

I've seen one at Eastern creek and it was pretty quick. But there was one at Wakefield and it didn't fair all that great. But there's too much variables to say what's what.

true, but there is one supra racing in NSW state championships... improved production i think.. would have to look into it!

goes OK, not winning any rounds that i've seen! sure it could be done, depends on budget and competition etc..

are you thinking of just doing a track day, not curcuit racing?

Dont think Ill jump straight into any series :Bang: hehe

Looking to do track days for 6-12 months with the Toyota Club and if its for me Ill apply for CAMS Level 3 (Have Level 2 atm). Once I have that I look into what i want to do next. May keep the Supra for a road car and import a 96-96 RX7 from japan which has been modified stupidly as I have seen them go for $13,000 -17,000 landed in Australia. I would feel better racing a 13k car in a series given the amount of contact that seems to occur LOL.

Anyone in SAU racing in any series around Australia, Hill Climb, Targa, Production etc?

B :bscreen:

Hey Bepo,

Being in Melbourne you may know the Ice Supra - well Nige is supposed to be hitting the track with that soon (will be detuned from its current 570+rwkw's). His major concern has been brakes.

He's obtained a set of Porsche GT2 callipers to go on before he hit's the track. Maybe have a chat to him down at Ice?

SG I agree, wont be wanting to set great times first time out I just wanted to know what kind of things would improve the stability and reliability of the car on the track so I didnt either smash it or blow something up LOL.

Good point about the brakes snowman, it currently has the 97 mdl updrage discs and calipers and I am going to put performance pads on it and flush the brake system and replace with good brake fluid. Going to flush the radiator, clean the air filter and fit a new FMIC before hitting the track too.

Another racing question, the car currently has 17/45/255's Potenza's all round but given they are low tread I was thinking about fitting Toyo T1S's which I have heard good things about.

1. Anyone have any tyre suggestions?

2. Is 255 too wide on the front? Standard is 235 front and 255 back.

Bepo :)

Another racing question, the car currently has 17/45/255's Potenza's all round but given they are low tread I was thinking about fitting Toyo T1S's which I have heard good things about.

1.  Anyone have any tyre suggestions?

2. Is 255 too wide on the front?  Standard is 235 front and 255 back.

How much are the Toyos, if they are reasonably priced then i jump at them as i have heard good things. If they are up around $500 a corner then id be going straight to Dunlop D01Js.

As for the Supra not being a good circuit car, i would disagree. They have a great tractable engine, the later models have very adequate 4 pot brakes, and they have good suspension setup.

I would think a Supra with nicely upgraded susp, a decent clutch and the usual exhaust, IC and ECU mods would make it a very quick car around Melb circuits like Sandown, Phillip Island and Calder. They arent as light as soem of the other RWD Jap cars, but look at the wheelbase and track of the thing...it would be a very good car for circuits like Phillip Island and Sandown.

As for the Supra not being a good circuit car, i would disagree. They have a great tractable engine, the later models have very adequate 4 pot brakes, and they have good suspension setup.

By right they should be, F/R track and wheelbase have a nice geometry. Don't forget they hold the quickest time for the modified class around Nurburgring circuit. As I said before get your suspension setup properly and you'll be right.

What is the best way to determine the optimal suspension config if your not an experienced racer? Trial and error is the only way I can think of apart from getting a professional to do it? Just had a thought, might be able to find the settings for track use on the internet.....

Toyo T1S are $305 a tyre at Tyrepower which I though was very good!!

Thanks guys for the info and support, its given me even more motivation to get out there and have some fun :)

I'll post the specs and pics of my car once I pick it up tommorow!

Do SAU events allow other cars to come along?.... eg. Supra's hehe.

B :(

What is the best way to determine the optimal suspension config if your not an experienced racer?  Trial and error is the only way I can think of apart from getting a professional to do it?  Just had a thought, might be able to find the settings for track use on the internet.....

Since you are in Melb drop in to Centreline suspension in Thomastown, a simple wheel alignment will do wonders...and Chris will be able to give you great advice on a setup should any components be worn and need replacing.

.Do SAU events allow other cars to come along?.... eg. Supra's hehe.

Of course, last day at Winton we had 2 x R33 GTRs, 1 x WRX, 1 x R33 GTST and a TX5 turbo....so the more the merrier. Just keep an eye out on Vic Events :(

you could get a set of 16" rims at 225.. and fit the semi slicks used by commodore cup cars

only $250 a corner, thats if 16" will fit. that way you can have those tyres just for the track and spend less on tyres!!

Bepo the best way to go about not smashing is to use any instructors at the track day. They are always asking if you're a novice and want an experienced trackie to sit in the passenger seat and give some pointers.

Reliability, just make sure it's serviced and all fluids are correct levels or even a little above. I run an extra litre of engine oil, but it's a different engine. If anything seems suspect at any time just back off and head for the pits. You can never guarantee it will all be smooth sailing.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The average previous owner for these cars were basically S-chassis owners in the US. Teenagers or teenager-adjacent. I often tell people that neglect is easier to fix than something that was actively "repaired" by previous owners.
    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
×
×
  • Create New...