Jump to content
SAU Community

Recommended Posts

the problem was a little better but not fixed yet so i took my car to garage7 for an inspection

13262423_701977659944045_1879640653_o.jp

i got it baack and they said it has a faulty o2 sensor

after driving it around for a few days i opened up the bonnet finding that the o2 sensor wasnt plugged back in

13219738_701977643277380_828891144_n.jpg

Link to comment
https://www.sau.com.au/forums/topic/464851-r34-gt-daily/#findComment-7729552
Share on other sites

i figured the head was blown and decided it would be better and cheaper to do a whole engine swap. theres a few reasons why i did this but summary was that the old motor just wasnt running right, was full of oil leaks and i needed to get a gear box rebuild anyway. the syncro in gear 2 was gone... so figured do it all at once.

i picked up a rb25de motor from jdm spares but soon after discovered that it was full of rust.

13249412_701994246609053_1115596271_n.jp

13219768_701994259942385_458927651_n.jpg

Link to comment
https://www.sau.com.au/forums/topic/464851-r34-gt-daily/#findComment-7729589
Share on other sites

while waiting to get the gear box back i figured ill do some other things to the car. got some project mu break pads, slotted and drilled rotors, weather shields, short shiftier, cusco coilovers, all new belts and gaskets and much more.

IMG_0870.jpg

after taking the exhaust off i realised that one of the bolts of the cat had snapped and the flanges had been welded together, but the weld was broken which explains why the 34 was so loud.

Link to comment
https://www.sau.com.au/forums/topic/464851-r34-gt-daily/#findComment-7729634
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The speedo's can be very conservative, when my Mazda NC MX5 speedo is showing 118kph, the GPS, and a calibrated radar.... cop mate.....hits me at around 110kph +/- 1 or 2 kph, and that is on a 215/45 17, stock tyres size is 205/45 17 as well, so weirdly conservative with stock tyre size When my Commodore speedo red 116kph GPS had me at 110kph After doing some offset and clearance measurements to see what can fit the NC on 17x8 +40, without guard rolling or rubbing anything at my current ride height, I've decided that when my tyres are toast, I'm going to fit 225/45 17 and see where that gets me IRT actual speed of my speedo and GPS/radar From the online calculator I should be still be doing around 5kph under an actual 110kph when the speedo is showing 110kph My ADHD requires that when I'm doing 110kph on the speedo, that the actual road speed is actually really close to that, and not alot slower And going from 205 to 225 still keeps the car within the %/mm allowable in the NSW vehicle rules and regulations, which is nice, as long as I'm looking at the latest version that is.....LOL https://www.nsw.gov.au/sites/default/files/2021-02/RMS-13.464-Light-vehicle-modifications-Vehicle-Standards-Information-No-6-November-2013.pdf
    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
    • Does the scanner do all the CUs in the car, or only the ECU?
    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
×
×
  • Create New...