Jump to content
SAU Community

Front Sway And Bushes - Sizes?

KeeL

By KeeL,
in Four Door Family & Wagoneers

 Share

Recommended Posts

KeeL Rookie

KeeL

Posted
Posted

Attempting to replace the D-bushes on my front sway, which is stock as far as I can tell (M35). However, I have only found one resource on it... Forums here one guy mentioned it was 29mm stock. Ended up buying cheap calipers and checking it out to be sure and I got 30mm.

Have spoken to a few parts providers, such as eBay sellers and the Nissan dealerships service teams, and they all say the only sizes that are stocked are 26mm, 32mm and 34mm. What?!

Has anybody changed theirs before? Do I have to get a whole new sway bar at a size that actually has D-bushes made for it? Is there some tricky shit going on because I have the turbo AWD variant as opposed to something a bit more basic? What's the go? Any help would be much appreciated!

Link to comment
https://www.sau.com.au/forums/topic/465007-front-sway-and-bushes-sizes/
Share on other sites
Daleo Grand Master

Daleo

Posted
Posted

The bar is 29mm.

OEM rubber are fine, and only cost around $30 from Nissan. I've been using a set of these for years on uprated Swaybars for years with no issues.

Whiteline don't do a replacement in OEM size, but pretty sure nolathane do.

They also use the PTFE impregnated polyurethane which is awesome, and completely maintenance free. They require no greasing or external lubrication.

  • Like 1
KeeL Rookie

KeeL

Posted
  • Author
Posted

Thanks for the replies! I've been super lost on what to do about all this.

I'll definitely be contacting Nolathane. I've been to both Autopro and Autobarn this last week and they've only offered the 26/32/34mm variants. I've given them all the details they asked for to the best of my knowledge... Maybe I missed something?

Cheers :yes:

TCO Contributor

TCO

Posted
Posted

Are you looking for OEM rubber replacements or poly bushes? If you're just after OEM bushes you could try a Nissan spares at a dealership part# is 54613AL520 *some* are actually helpful and are happy to order parts (others not so much).

Alternatively purchase via Amayama etc.. Best to order a few items to make it worth the shipping cost (although i've found their shipping Japan->Aust warehouse to be very reasonable).

Other option is upgrade...

  • Like 1
KeeL Rookie

KeeL

Posted
  • Author
Posted

Here's to hoping I won't need them custom made!

TCO, anything will do at this stage. We're not 100% sure it'll fix my problem so the sooner I patch this up the closer I'll be to getting it resolved... Have you had experience with both? Any recommendations?

Good info though, really appreciate it!

TCO Contributor

TCO

Posted
Posted

What issue are you trying to resolve?

Nissan will be hit an miss depending on the parts guys enthusiasm (Morphett Vale guys are pretty helpful). I've bought a bunch of bits and pieces via Amayama, shipped from both UAE and Japan warehouses. Reasonably quick with replying and shipping etc.. haven't had any issues yet, just have to make it worth the shipping.

KeeL Rookie

KeeL

Posted
  • Author
Posted

Have a wobbly/clunky metallic noise from the front end that happens with every little bump in the road. Sounds like something is loose and banging against a rubber surface of some kind. I have a mate who's a 4th year apprentice but has minimal experience with imports, so we did our best at a self diagnosis lol. The previous owner was told it was his ball joints, but we checked those out and didn't look like they were the issue. Noise doesn't seem to be coming from that area when the car is jacked up and the wheels wobbled around. Figured we'd just replace the cheapest parts first since it's not a big deal if they don't fix the issue.

I spoke to the Morphett Vale Nissan parts guy, he was pretty helpful and providing him with the part number you gave made him pretty happy haha. They can get them in but it can take up to 3 months supposedly... Ringing around to see if I can get them sooner, elsewhere.

Daleo Grand Master

Daleo

Posted
Posted

Part number is; 54613AL520

You can see it below in the exploded diagram. You can also see it in EPCdata, and even order online.
The link rods are there too; there are 3 different pieces, left and right had arms, and a universal base piece that bolts into the lower arm.

Their prices are significantly cheaper for genuine parts than Nissan Australia.

http://nissan.epc-data.com/stagea/nm35/6835-vq25dd/trans/401/54613/

6ce72c48ce37b83634a35c5a2218ca6c.png

e2c5bb851b629d88e4c29b6ea4174422216c5120

  • Like 1
KeeL Rookie

KeeL

Posted
  • Author
Posted

Any chance you could help me with this? https://www.amayama.com/en/search/?q=54613AL520

I'm not sure what the order form is asking me. The top option suggests I'd pay for parts to be sent from Dubai to Japan I think? And the option below from Japan to Australia? Since I need 2 bushes, will I need to order 2 from the top and 2 from the bottom? Confused, haha.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • MBS206
      What should I do next to hold the head on

      By MBS206 · Posted

      When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • jez NF
      The Evolution Of "night Fury"

      By jez NF · Posted

    • Rezz
      Chris' Toyota Mark ii JZX110

      By Rezz · Posted

      Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • Kinkstaah
      new 1.5 LSD issues/concerns

      By Kinkstaah · Posted

      If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...