Jump to content
SAU Community

2016 Round 6 Winton - Saturday 13th August Hosted By Circuit Club


Recommended Posts

13512105_1383216878371351_74933365472289



After the success of the 2015 Circuit Club day at Winton we thought it would be great so join them again. There will be passenger sessions throughout the day



Saturday 13th August


- For anyone interested in attending their first track day here all you need to know : http://www.sau.com.a...y-requirements/



Licence:


You will need a CAMS or AASA licence to compete on the day.


L2S can be obtained via https://www.cams.com.au/


You can purchase a AASA day licence at the track for $TBA (good idea if this is the only track day you are doing this year)


Other requirements : http://www.sau.com.a...y-requirements/



Location:


Winton Motor Raceway


Fox Street, Winton


https://goo.gl/maps/wWhJVKs4aJv



Pricing:


$230 per driver

$80 per second driver

$35 per passenger

Spectators: Free



Entry/Registration


http://circuitclub.com.au/event/82



Squires Loft Nunawading will be putting on lunch for all SAU VIC members (Comment in this thread if you are attending so we can cater accordingly).




12814196_1283609094998797_25854580291215




  • Like 2
  • 2 weeks later...

Great,

 

I am hoping to use this as a shakedown before bathurst at the end of the year.

I also hear we might have a special S14 production car make it's first appearance in about 10 years!

  • Like 2
  • 2 weeks later...
6 minutes ago, acsplit said:

Hey Josh 

I will find out about passenger/ instructor sessions the guys are circuit club are usually very flexible so I would say so.

Thanks Andrew. If I could be his instructor that would be perfect.

  • 2 weeks later...

Ok guys,

Waiting on hearing back on instructor sessions but I have heard a few guys who have been sidelined most of the year are coming out for this one.

Also sneak peak of a car that has not turned a wheel at the track in over 10 years and should make it's shakedown at Winton.

 

13653370_1410901292269576_66821806346019

On 29 June 2016 at 8:14 PM, phantc_s15 said:

Awesome! Hope to get the s14 to this!

I'll be there but not driving (the old man is driving).

So if anyone would like some coaching I will be more than happy to help.

  • Like 2
20 hours ago, ssxRicho said:

I'll be there but not driving (the old man is driving).

So if anyone would like some coaching I will be more than happy to help.

Would def be interested in some coaching too!



  • Similar Content

  • Latest Posts

    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
×
×
  • Create New...