Jump to content
SAU Community

Recommended Posts

Near new conditon stainless steel exhaust. Has been sitting on the shelf collecting dust for a while. Font pipes are 65mm into 80mm exhaust. Was going to keep this for rego purposes before doing custom but bugger it...will worry about a street exhaust if I run into noise issues with my custom twin system.

$450 from the MX front pipes.

Sorry about the pics showing dust and crud. If i need to I will give them a wipe down so that you can see the excellent, low km condition

 

13898449_10155157140204741_416257975_o.jpg

13902073_10155157140324741_1390489969_o.jpg

13918620_10155157141224741_161381399_o.jpg

 

Well...i needed to clean them up to post them so gave them a quick hose. As can be seen they are in good nic...if you are really anal a light polish will have them looking like new

Happy to post

20160805_215252.jpg

20160805_215330.jpg

20160805_215320.jpg

  • 4 weeks later...
  • 1 month later...

Alcon 6 Pot Caliper and Rotors

I have held on to these calipers and rotors for years with a plan of putting them on whatever I bought next, an R31 coupe or R32 GTR. But still dont have the space for a 4th car and reality has set in that I have to continue to part with what I think is cool stuff I have collected over the years for my cars. 

I dont intend to run 18s on my my GTSt and it has a good 4 pot Stoptech 343mm setup for 17s and my Cossie already has 378mm 6 pot APs so these have no place to go except a 4th car which isn't happening anytime soon.:(

So, these are similar to the common Alcon Mono6 that many people run on 365x32mm rotor. However these were an Alcon Jaguar caliper that ran 410x35mm rotors on what I believe was their GT4 cars run by Prodrive. So simply put the std Mono6 can only take a 32mm rotor and doesnt have the curvature to go much over 365mm. These take a 35mm rotor and can take any common R35 GTR rotor  diameter.

These calipers are used, but like new. They did one event and the car ended up through the kitty litter so the caliper got a few nics and bumps as rocks bounced around between rim and brakes. They have been freshly coated in silver by HPC and never ran on a car by me. I slapped a vinyl Alcon sticker on the caliper for the pics, but my intetion was to stencil NISSAN on the caliper, but thankfully havent done it to date and guess if I had doen so it would have limited their appeal for this sale. SO you are free to stick the Alcon stickers on them, paint Alcon on them or paint whatever you like

But has evidenced by the condition of the pistons you can see they are  as new.

Rather than the 410mm Jag rotors I have a set of R35 GTR rotors measuring 380x35mm. They re freshly machined and still in spec but wont have another machine in them 

The calipers and rotors come with new DS2500 pads, but no brake lines or mounts. 

 

Asking $2200 for them for calipers, pads and rotors.

 

20161104_185833.jpg

20161104_210741.jpg

20161104_210749.jpg

20161104_210758.jpg

20161104_220401.jpg

  • Like 1

Will take $2,000 for the Alcons and rotors

 

ex HRT Momo seat

EX Holden Racing Team (HRT) seat out of Jason Bright's 2002 car for ride days. 

I ran this seat in my track car for a few years and one weekend at Phillip Island Jason Bright was good enough to sign the seat for me 

The seat is a Carbon Kevlar Momo race seat. Back in the day it was a $4,500 seat and about the best strength-weight proposituon you could buy. The left hand side head restraint was trimmed to suit the HRT roll cage ( see pics) 

The past number of years i have kept the seat for my simulator setup but just don't have the space for it anymore so parting with my part of HRT history 
 
s-l1600.jpg

s-l1600.jpg

s-l1600.jpg

s-l1600.jpg

 

Also  have rear std R33 GTR upper and lower suspension arms for $50 each (traction, camber and LCA)

 

Also have R32 rear end bits for $50 each, inc LCA and hubs

Also found these in the bottom of a box and forgot I had them.  I run 343mm rotors rather than the 340mm these were intended for when used with the Biot 340 rotor and Brembo F40/F50 caliper. 

About the biggest rotor / caliper arrangement you can get under most 17" wheels ( I run TE37s with no clearance problems)

There are several cheap Brembo F40/F50 setups for sale on SAU at the moment so will help you get a good setup for reasonable dollars

Off this kit

http://www.biot.co.jp/products/biot/caliper/f50-4pot/

 http://www.biot.co.jp/products/biot/caliper/f50-4pot/brembo-f50-4pot-340/

http://www.biot.co.jp/products/biot/rotor/front/

Asking $200 delivered for them

 

13844063_10155143138084741_2002753866_o.jpg

13898214_10155143137609741_1499789291_o.jpg

 

  • 3 weeks later...
  • 3 months later...
  • 1 month later...
  • 2 weeks later...
  • 4 weeks later...

As per above....BUMPY:  Will take $2,000 for the Alcons and rotors

 

rotors.

 

20161104_185833.jpg

20161104_210741.jpg

20161104_210749.jpg

20161104_210758.jpg

20161104_220401.jpg

Also  have rear std R33 GTR upper and lower suspension arms for $50 each (traction, camber and LCA)

Also have R32 rear end bits for $50 each, inc LCA and hubs

ex HRT Momo seat

EX Holden Racing Team (HRT) seat out of Jason Bright's 2002 car for ride days. 
I ran this seat in my track car for a few years and one weekend at Phillip Island Jason Bright was good enough to sign the seat for me 
The seat is a Carbon Kevlar Momo race seat. Back in the day it was a $4,500 seat and about the best strength-weight proposituon you could buy. The left hand side head restraint was trimmed to suit the HRT roll cage ( see pics) 
The past number of years i have kept the seat for my simulator setup but just don't have the space for it anymore so parting with my part of HRT history 
 
s-l1600.jpg

s-l1600.jpg

s-l1600.jpg

s-l1600.jpg

 

  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...