Jump to content
SAU Community

Recommended Posts

27 minutes ago, V28VX37 said:


Pretty s__t when cold to be honest. Ok when warmed up except in really tight turns i.e. shopping cente car parks. Whatever drivability I previously had left for my better half is now pretty much gone ;)

In terms of performance there's no benefit on the street really, maybe on a mountain run. Yet to run it on the track, we'll see.

For a mostly-street car VLSD or helical is the better option.

...or what about a Cusco 1-way????

  • 3 weeks later...
On 8/28/2016 at 9:03 PM, V28VX37 said:

Yeah fingers crossed :)

Re break in, I've done mostly normal suburban driving and trying to take it easy for first few hundred km's. I did do about 10 min of figure 8's on the first day but it gets old pretty quickly.

I actually had the diff on order before my last event but it never made it on time. Probably better that way, at least it gets a more peaceful run-in period before Sandown on October 1st.

How'd you go at Sandown?

How did it feel and what sort of lap time improvements did you see?

How'd you go at Sandown?
How did it feel and what sort of lap time improvements did you see?

Unfortunately I spent most of the day confirming that my head gasket is gone so only got 7 crappy laps in. Morning was very wet and the rear was very predictable in power oversteer but other than that there's very little to report.

Overall I'm not sure it's the right diff for my use to be honest. I drive about 10k a year and with a handful of track days it's only a fraction of the time that it gets used as intended. It's not a short distance city driving diff that's for sure.
3 hours ago, V28VX37 said:


Unfortunately I spent most of the day confirming that my head gasket is gone so only got 7 crappy laps in. Morning was very wet and the rear was very predictable in power oversteer but other than that there's very little to report.

Overall I'm not sure it's the right diff for my use to be honest. I drive about 10k a year and with a handful of track days it's only a fraction of the time that it gets used as intended. It's not a short distance city driving diff that's for sure.

Thanks UC

Im considering getting a nismo pro gt diff in the future for track days

Well if you end up wanting to sell it let me know :P

  • Like 1
5 hours ago, blah_blah said:

Thanks UC

Im considering getting a nismo pro gt diff in the future for track days

Well if you end up wanting to sell it let me know :P

Haha thanks Tony, I think I'll just need to man up and get used to it. At least mine's not an auto like Greg's so I can clutch in around hairpins :P

Unless yours is a track only car definitely do a test drive first to see for yourself, happy to take you for a spin.

  • Like 1
  • 1 month later...
On 28/09/2016 at 5:32 PM, V28VX37 said:

Pretty s__t when cold to be honest. Ok when warmed up except in really tight turns i.e. shopping cente car parks. Whatever drivability I previously had left for my better half is now pretty much gone ;)

Came here to get reassurance that I didn't get a dud unit. 

I had mine installed recently and only now fully understand what you are talking about. 

Does a fantastic job putting power down but it's not at all discreet inside the cabin.

Rickety navigating tight to medium turns, clunky upon exiting sweepers.  

Also locks up with very little provocation. 

Despite how brash it is to live with I would still opt for the Nismo GT Pro 1.5 way LSD over the standard viscous LSD. 

  • Like 1
Came here to get reassurance that I didn't get a dud unit. 
I had mine installed recently and only now fully understand what you are talking about. 
Does a fantastic job putting power down but it's not at all discreet inside the cabin.
Rickety navigating tight to medium turns, clunky upon exiting sweepers.  
Also locks up with very little provocation. 
Despite how brash it is to live with I would still opt for the Nismo GT Pro 1.5 way LSD over the standard viscous LSD. 

I've found that in suburban driving I either clutch in around a tight corner or need to give it a bit of gas to lock. Mine's at its noisiest when it's not fully engaged around a corner.

I never had issues putting power down or single pegging with the stock viscous diff so this is definitely a step down around town. Live and learn.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
×
×
  • Create New...