Jump to content
SAU Community

Recommended Posts

Clearing out some spare parts

1. Power fc d jetro to suit r32 r33 gtr comes with hand controller and map sensors good condition $600

4e206eaa683f4f0a0c20b6442dbf0527.jpg

2. Ross crank trigger signal conveter part #306001 was wired to power fc. I'm unsure of what other ecu this maybe compatible with $100

5ef53f367c70a89d749f9419ce1a37fd.jpg

3. Sard 800cc injectors removed from r32 gtr with plugs will need new pins only ever used with petrol $250

61051383bb830919b9a0d835c9e60c8c.jpg

4. Tomie rb26 sump bafle only used for approx 3000 kms. One rubber trap door is a little twisted may be missing some bolts $80

6d579c06f87f85d9c90eb93ec2da068c.jpg

5. R32 gtr 3.5 inch cat (i think 100 cell) and 3.5 inch decat pipe in good condition both with egt port $200

dbc47bc3abeacf25da5c8f61290230f0.jpg

6. R32 gtr hot side intercooler hard pipe kit (just jap) with hoses and clamps. I purchased this for the cold side only $50

9f25548cc26e55cd9eb92a38a20b0735.jpg

7. R33 series 3 std gear set and sandwich plate brand new. I purchased a new gearbox from just jap and replaced all these parts with an os giken 1-5 gearset $350

1cb13d3c9cec800c79a46bb56a64c519.jpg

8. R33 gtr pull style gearbox front cover brand new with gasket also push style slave cylinder brand new $200

bcc7892268506720e2042ffdf03a5eac.jpg

All parts are located at Schofields western sydney feel free to contact me on 0407701876 I'm not always available to check online messages.

Chris

 

 

 

 

 

  • 2 weeks later...
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
×
×
  • Create New...