Jump to content
SAU Community

Recommended Posts

Hi guys, im just about to service my RB20DE for the first time and need a little help chasing the part numbers for a few things. Could someone be kind enough to tell me the part number for

* Oil filter

* Fuel Filter

Also, what grade of oil is suitable for a slightly modded R32. Maybe making an extra 15 to 25 kw.

Link to comment
https://www.sau.com.au/forums/topic/46740-servicing-your-na/
Share on other sites

We are currently compiling service details for all the different NA motors.

As far as oil/fuel filters go, you will find the part numbers in books at y our local auto parts store.

When you bring the parts home, add the part numbers to our list here:

http://www.skylinesaustralia.com/forums/sh...ead.php?t=39760 :)

Link to comment
https://www.sau.com.au/forums/topic/46740-servicing-your-na/#findComment-948037
Share on other sites

here we go........

I'm pretty sure that the parts for the turbo version are the same parts that are used on the NA, but if i'm wrong, somebody please correct me and i'll remove all of this :)

ripped from www.rb20det.com

Water Pump: 21010-21U25

Thermostat: 21200-42L05

coil Packs: 22433 60u02 mcp-300124

Oil Filter Genuine Nissan: 15208-H8911

Oil Filter Ryco: Z145A

Oil Filter Valvoline: R9

Oil Capacity: 4.6L with filter (7.5w 30 is recommended)

Coolant Capacity: 9L

Manual Gearbox: 2L (80w 90)

P/s Fluid capacity, non-hicas: 1.8L

Sump washer 11026-01M02

Fuel filter 16400-53J10

Rear diff oil 1.5L

Alternator belt 11720-24U00

Cam belt 13028-20P10

PAS belt 11950-04U00

NGK standard plugs PFR5A-11 1.1mm gapped

NGK Iridium plugs T7341T-8 0.8mm gapped

Link to comment
https://www.sau.com.au/forums/topic/46740-servicing-your-na/#findComment-948465
Share on other sites

  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah i found that alot of parts can be wrong or "very" hard to get the real right one. I already bought some brakes years ago on me "old" GT calipers and they were wrong too 😄  I told them too. Even send them pictures...but they said "EBC catalogue has them on my car... So i dont know what their answer will be. I call monday them and let them know that they are really not on my car. If they were they would be already on a car...
    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
×
×
  • Create New...