Jump to content
SAU Community

Super Drager system from HKS, can anyone recommend the system

ICER33

By ICER33,
in Engines & Forced Induction

 Share

Recommended Posts

PTR33 Proficient

PTR33

Posted
Posted

120% happy with mine.

I have HKS Dump, Front pipe and Cat back with Super Drager muffler.

good power but fairly quiet.

I have been toying with the idea of ditching the resonator to pump up the volume a little.

In my opinion that bigass muffler and 5" tip looks the goods with the 4" pipe leading into it visable from the rear of the car as well.

Gav Mentor

Gav

Posted
Posted

Good system - not too droney at cruise but wakes up when you give it to it.

Not too restrictive on moderate power applications, but will know for sure in a few weeks when the new motor is back in (with considerable more power)

  • 4 months later...
B0oStEr Mentor

B0oStEr

Posted
Posted

I'm considering using a 2nd hand Super Drager cat-back exhaust from a R32 GTR on my R32 GTSt.

Would it be noisier on the smaller engine? Would it be noise legal? Are they 90mm?

Are they full stainless steel or mild steel with SS rear muffler or available in both?

mattysaidso Experienced

mattysaidso

Posted
Posted
120% happy with mine.

I have HKS Dump, Front pipe and Cat back with Super Drager muffler.  

good power but fairly quiet.  

I have been toying with the idea of ditching the resonator to pump up the volume a little.  

 

In my opinion that bigass muffler and 5" tip looks the goods with the 4" pipe leading into it visable from the rear of the car as well.

agreed mate, looks great not too noisy and the rear muffler does look pretty fat! :)

SLK-GTR Community Regular

SLK-GTR

Posted
Posted

they dont make brand new ones anymore but there is a similar one called super silencer i think its called that its 3.3/4 inch, if you are buying a second hand one ive seen them go for less than $700, what you could also do is just go to your exhaust place and ask them for a quote on a 3.5 mandrel bent full exhaust, as long as you buy good brand mufflers and cat converters it wont be too loud, you dont need stainless i think that its a wank factor cause its shiney and looks good, you would save hundereds getting it made out of mild steel. its completey up to you what you like, i priced the HKS exhaust brand new and it was well over 1000 and that is just for cat back you could get a full mild steel exhaust with good mufflers and cat for that price.

leech_ Grand Master

leech_

Posted
Posted

yea i got my super dragger installed with a high flow cat and 3" dump pipe i love it. I was worried about it being to loud but was very pleased when i turner her over to find a nice little rumble from the back at idle then when you open her up she puts up a little bit more noise but again nothing over the top

aybee Experienced

aybee

Posted
Posted

it is very quiet but very high flowing at the same time.

Nigels supra has this exhaust and he gained 30rwkw when he changed from a twin 2.5. and we all know that his car is HIGH powered.

i have this with full exhaust on a rb20 and a friend has it just cat back on a 33. mines quiet, and his is very quiet.

HKS34R Collaborator

HKS34R

Posted
Posted

Highly recommended, but as noted, HKS no longer make them due to the tightening of noise regulations over there. I have one on my R34 (stock front pipe and cat) and it didn't even trouble the engineer (only 82db @ 4700rpm). Looks the part too!!

  • 3 weeks later...
ScottKing GTS-4 Community Regular

ScottKing GTS-4

Posted
Posted

I run with the resonator - doesnt restrict flow at all just takes the drone out. It's a pretty big resonator, so without it I personally think it would be as loud as a bitch.:Bang:

How many of you guys run it without a resonator/middle muffler ?

Just dump pipe - front pipe - cat - pipe - super dragger ?

For those that do - do you think it's legal? does it drone? loud?

Ryosuke Takahashi Community Regular

Ryosuke Takahashi

Posted
Posted

hey guys are all the hks exhaust systems only cat backs?

i have a straight though 3inch + 3inch dump pipe and its very loud

what would be the difference between the hks exhaust and just a normal 3inch exhaust system??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      What brakes on R34 GTT(Europe)

      By Dose Pipe Sutututu · Posted

      Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...