Jump to content
SAU Community

Recommended Posts

R33 s2 1996 missfire

I brought this car 2 days ago and between 5500 and 6000 rpm she missfires the owner before me had put spark plugs in the car that were 4 dollars each, i went to auto one and they said they should be 25 each the engine being a rb25det would this be why she miss fires??

Any help is appreciated!? thanks in advance 

Link to comment
https://www.sau.com.au/forums/topic/468698-r33-s2-1996-missfire/
Share on other sites

No, check the gap on the spark plugs. 0.8mm is what you want. The $4 spark plugs are fine,  BCPR6ES or BCPR7ES is what you want. If it still misses at 0.8mm your coilpacks probably need replacing. If its stock ecu you could be getting r and r. This happens if the ecu detects too much airflow and tries to protect the engine by dumping fuel in it. Try turning the boost down a bit to say 7-8 psi and see if the miss goes away. Try all that and report back, cheers. Buy some new $4 sparkies while you're at it and make sure you get the 0.8mm version BCPR6ES, not BCPR6ES-11

  • Like 1

+1 for regapping plugs

I had the exact same problem after putting in cheap copper plugs and running 10 psi (felt like a spluttering and loss of power after certain rpm).

I gapped the plugs down to 0.8 and wrapped the coilpacks in electrical tape and the problem went away.

I brought platinum plugs for it but and put then to 0.85, still missfires my dad said it feels like its not getting enough fuel going through it.. i have a apexi neo is there anyway i could control it through that

The shop said to get the expensive ones, who'd have thought it......

For future anyway, the advantages of Platinum are the longer service intervals (I think they claim 100,000km on the plugs) which makes them sound good. This is all well and good on a mazda 3, not so much on a modified Skyline. I perfer to change plugs more often so its cheaper just to get $2 copper plugs and change them more often

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinda glad I never got to this ..    https://www.facebook.com/groups/1483859159195077
    • @GTSBoy This method was able to get readings of -10 to -2, so it looks like its monitoring.  Now I need to figure out why the vacuum on the line provided isn't alternating with manifold pressure.  I went with 2 lines that an RB25 tuner recommended but I'll get a longer hose and try directly off the back of the manifold.  He may have been used to OEM intake setups while I have a DBW setup that removed the MAF and IACV.  
    • I work at a car detailing and tinting shop called Quark which gets all manner of German cars in usually (mainly due to a contract with Mercedes Benz Kita Osaka, BMW Nishinomiya and others) but every once in a while something special comes in, like a fully restored 1972 HS30 Nissan Fairlady 240ZG... The shop owner had immediately started applying film to the windows as soon as it was in the shop so the interior was completely covered in towels and plastic sheets. But I could get a few photos of the engine bay which was restored like new. Such an amazing car to see in pristine condition in Japan these days.  
    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
×
×
  • Create New...