Jump to content
SAU Community

Recommended Posts

Gtr r35 fuel temperature sensor 

Hi guys. Im in need of a gtr r35 fuel temperature sensor.  It lives on the bulkhead  of the fuel pumps. Its just on the outside of the fuel pump housing.

about 1.5 inch long its black and also has 2 black wires coming of it. Im kind of desperate  for one. Please let me know if one is available  asap.

cheers alex 

 

Edited by Alexgtr
Mistake
Link to comment
https://www.sau.com.au/forums/topic/468992-gtr-r35-fuel-temperature/
Share on other sites

Hi mate yes thats is what im looking for.

I live in australia  melbourne  victoria.

Are you willing to sell that to me. If so how much would you be looking for.  

Including  shipping  please.  

 

 

Any help on this guys i need one and i cant seem to find one at all. 

Has anyone got a part number or something.  

Ill buy from overseas thats fine but getting info is in posible 

please help.  

3 minutes ago, Gdzilla_ said:

Overseas.... where are you located exactly?

I can be of assistance if you wish, I'm located in Alberta Canada. 

Posted image is what you're in need of correct?

 

IMG_3024.JPG

Yes mate  thats what im looking for. Would you aell it to me and sent to Australia  melbourne victoria. 

 

If Nissan can't source the part number for it, sounds like to me it's because the sensor is part of the fuel basket. It's not available separately. 

But none the less, I will check with my Nissan parts guru. What model and year is your R35? 

  • 1 year later...
  • 4 years later...
On 8/2/2017 at 4:02 AM, Alexgtr said:

Gtr r35 fuel temperature sensor 

Hi guys. Im in need of a gtr r35 fuel temperature sensor.  It lives on the bulkhead  of the fuel pumps. Its just on the outside of the fuel pump housing.

about 1.5 inch long its black and also has 2 black wires coming of it. Im kind of desperate  for one. Please let me know if one is available  asap.

cheers alex 

 

9F26D9ED-7C73-4EB5-B955-F35B290C035C.thumb.jpeg.94ec85b3143b4b1267dfb7d110614a37.jpeg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have a look at that (shitty) pic I posted. You can see AN -4 braided line coming to a -4 to 1/8 BSPT adapter, into a 1/8 BSPT T piece. The Haltech pressure sender is screwed into the long arm of the sender and factory sender (pre your pic) into the T side. You can also see the cable tie holding the whole contraption in place. Is it better than mounting the sender direct to your engine fitting......yes because it removes that vibration as the engine revs out 50 times every lap and that factory sender is pretty big. Is it necessary for you......well I've got no idea, I just don't like something important failing twice so over-engineer it to the moon!
    • Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
×
×
  • Create New...