R33 gtst brake upgrade

[Boostin']

R33 gtst brake upgrade

Hi guys,

First post on SAU so try and be patient if I'm not asking quite the right stuff. I'm about to start building a low comp rb25det (cyl 6 is gone) I've just bought and before all that extra power happens I'm needing to upgrade the brakes so what brake setups have gtst owners gone with? I'm targeting 420-500whp and I'd prefer to have too much stopping power than not enough. And whilst I'm here what other safety mods should I be doing going for that power? Thank you all in advance,

 

Edited February 13, 2017 by Boostin'

[Coullsy]

Welcome to the forums,

There are plenty of threads already covering brake upgrades, so the search bar is your friend Here is one for you

Tyres and suspension are where you will need to concentrate on, you can have the best brake set up in the world, but it won't work with shitty tyres.

[KiwiRS4T]

Why a low compression engine? Your target should be 9:1 at least.

R34 GTT brakes will be fine with better fluid and pads.

But as above look in the brakes section.

[Boostin']

Sorry the low comp engine is going to be rebuilt just saying I've purchased a motor to build. My skyline currently has 250rwkw from stock internals t3/t4 turbo from previous owner been told by a mechanic it's actually off a truck it makes good power but a little laggy.ive bought a atr43sat 76mm turbo with .63 rear with the built motor on flex fuel I'm hoping to see a lot more response and power so I'm gonna need the brakes. Thanks for the reference to the other pages guys 

[Boostin']

 

[niZmO_Man]

Your 4pots should be fine, with pads such as Intima SR and fresh super DOT4 fluid.

If you want bigger, get the ATTKD kits.