Jump to content
SAU Community

Recommended Posts

NO OIL PRESSURE

Hey guys new to the skyline scene always wanted one. I brought a 1994 r33 skyline gtst 3 weeks ago. I drove it home fine around 100kms away from home. I parked it in my driveway which is steep arse down nose up. Started the car to take it for a rwc and it ran okay but not the best. Got home and parked it nose down the driveway. Now the car has no oil pressure on the gauge and the lifters sound like they want to jump out of yhe engine. Checked inside the oil filler cap and looks like no oil getting to the top of the motor. Any ideas guys ? Im thinking oil pump but as i said new to skylines and not 100% sure. Any ideas would be useful guys.

1489447545422-1261200894.jpg

Link to comment
https://www.sau.com.au/forums/topic/469608-no-oil-pressure/
Share on other sites

Don't always trust the oil pressure gage. At best it gives an indication. Sometimes the gage or the oil pressure sender just fails.

Obviously don't drive it until diagnosed correctly. Get another gauge on it and test it and go from there.

Yes it could be the oil pump, or it could be something else.

If your still talking to the previous owner it wouldn't hurt to ask the history.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/469608-no-oil-pressure/#findComment-7817392
Share on other sites

Sounds like you may have been duded. Highly likely the previous owner has had it checked out and may know the issue (and cost to fix).

Get a good mechanic to go over it now.

Obviously would have been best to do this ^ before parting with your hard earned!

We live, we learn

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/469608-no-oil-pressure/#findComment-7817411
Share on other sites

  • 2 months later...

Sorry for late reply been busy with work and working on the car. I almost gave up but doing things right. Even on flat surface car was still noisy. Gauge read nothing on cold start and once warmed up, also no oil warning light lights up. I have picked up another working good motor which im in the middle of putting in. God dam a engine swsp on these things is pretty intense lol. Thanks fot you help guys.

Link to comment
https://www.sau.com.au/forums/topic/469608-no-oil-pressure/#findComment-7834366
Share on other sites

Thanks mate. Seen this motor working perfect b4 pulled out so I know its a good one. Bigger job than expected though motor replacement. I can have a commodore motor out and back in 2 hours lol. This has been nearly a month to get this far. Just wanna make sure its done right. Plus mechanics wanted $3500 to replace the motor with me buying a motor to go in.

Link to comment
https://www.sau.com.au/forums/topic/469608-no-oil-pressure/#findComment-7834374
Share on other sites

23 minutes ago, Disturbed Paulie said:

Thanks mate. Seen this motor working perfect b4 pulled out so I know its a good one. Bigger job than expected though motor replacement. I can have a commodore motor out and back in 2 hours lol. This has been nearly a month to get this far. Just wanna make sure its done right. Plus mechanics wanted $3500 to replace the motor with me buying a motor to go in.

About $1.5k-$2k too much^

Take your time and ask questions on SAU if you get stuck.

It really peeves me how others can sell a lemon.

 

Link to comment
https://www.sau.com.au/forums/topic/469608-no-oil-pressure/#findComment-7834377
Share on other sites

Yeah mate i did no oil pressure at all. No oil in the top end of the motor looks clean like its just been degreased and dry even after motor running for 30 secs to min max( didnt wanna run it longer motor sounded like it was gonna fall apart ).

Link to comment
https://www.sau.com.au/forums/topic/469608-no-oil-pressure/#findComment-7834614
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinda glad I never got to this ..    https://www.facebook.com/groups/1483859159195077
    • @GTSBoy This method was able to get readings of -10 to -2, so it looks like its monitoring.  Now I need to figure out why the vacuum on the line provided isn't alternating with manifold pressure.  I went with 2 lines that an RB25 tuner recommended but I'll get a longer hose and try directly off the back of the manifold.  He may have been used to OEM intake setups while I have a DBW setup that removed the MAF and IACV.  
    • I work at a car detailing and tinting shop called Quark which gets all manner of German cars in usually (mainly due to a contract with Mercedes Benz Kita Osaka, BMW Nishinomiya and others) but every once in a while something special comes in, like a fully restored 1972 HS30 Nissan Fairlady 240ZG... The shop owner had immediately started applying film to the windows as soon as it was in the shop so the interior was completely covered in towels and plastic sheets. But I could get a few photos of the engine bay which was restored like new. Such an amazing car to see in pristine condition in Japan these days.  
    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
×
×
  • Create New...