Jump to content
SAU Community

R32GTR Front and Rear Bar (Genuine) + Jun Front Lip

Veilside R33
 Share

Recommended Posts

Veilside R33 Veteran

Veilside R33

Posted
Posted

R32GTR Front and Rear Bar (Genuine) + Jun Front Lip

Hi all,

Have been dormant on SAU for ages, but as my R32 build progresses I'll be selling a lot of parts. 

First up is the front and rear bar. Genuine items and I believe they're the originals (Nissan logo is stamped into the backs of them). Both are in very good condition for their age, with just the usual small nicks and swirl marks, but overall they're fantastic. The one exception being the drivers side of the front bar, which I brilliantly scraped along a concrete pillar, meaning you'll probably want to have it touched up professionally. 

I've attached a couple pics of the car with the kit on, so you get a proper idea of what they look like on. 

Also have a JUN carbon fibre front skirt, which attaches to the bar. Not sure if this is genuine JUN, but given that it appears to be carbon over an FRP base, I'd have to think it's not genuine JUN. Hard to know. Overall it's in great condition, with the exception being a few small pressure cracks in the clear coat from scraping speedhumps (have included photos where possible).

I'm way out of touch with the parts market, so I'm guessing on pricing. I guess if it's too high I'll end up having to bring the prices down. Too low and someone gets a good deal.

Front Bar: $400

Rear Bar: 300

Front Lip: $300

It's also worth noting that I'm both mechanically and technically useless, so I'm probably not going to know the answers to any even remotely obscure questions about the kit. 

Happy to post (would prefer pickup in the ACT) at buyers expense. Buyer will need to arrange own courier (postcode it'll be collected from is 2603)

Cheers, 

Andrew.

Front Bar 1.JPG

Front Bar 3.JPG

Front Bar 4.JPG

Front Bar 5.JPG

Front Lip 1.JPG

Front Lip 2.JPG

Front Lip 3.JPG

Front Lip 4.JPG

Front Lip 5.JPG

Front Lip 6.JPG

Rear Bar 1.JPG

Rear Bar 2.JPG

Rear Bar 3.JPG

Rear Bar 4.JPG

Rear Bar 5.JPG

Front Bar 2.JPG

post-40997-0-07083800-1395803422.jpg

post-40997-0-33741800-1395803162.jpg

post-40997-0-96595000-1395803341.jpg

Veilside R33 Veteran

Veilside R33

Posted
  • Author
Posted

Hi all,

Got slammed with a bunch of PM's straight away. 

Looking like everything sold, pending payment. Lip may still be available and will know shortly.

Will update the thread once that's confirmed or changes. 

Cheers,

Andrew.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • albyz34gt
      R34 N/a And R34 Turbo (gtt) Transmission.. Uh, Problem.

      By albyz34gt · Posted

      @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • RB25inside
      R34 Handbrake light saying ON and intermittently flashing

      By RB25inside · Posted

      Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • GTSBoy
      ECU sees many times the speed than speedo does (R34 swap)

      By GTSBoy · Posted

      Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
    • Duncan
      R34 Handbrake light saying ON and intermittently flashing

      By Duncan · Posted

      Assuming your brake pads are not worn right down, I'd add a little brake fluid. Is there any sign of a brake fluid leak?
    • RB25inside
      R34 Handbrake light saying ON and intermittently flashing

      By RB25inside · Posted

      Hello all,  I need of some help. On my drive home my handbrake light lit up and started flashing. When I got home I checked my handbrake sensor under the centre console and nothing seemed out of the ordinary. I have scanned my car via the consult port, no codes shown. Checked my brake fluid as well which is half full. Tried unplugging the brake master but it didn't change anything. Thoughts on what it could be? The master float doesn't seem to be stuck. My car is an 1998 ER34 sedan GT. No hicas but has ABS Photos below 👇🏾 
×
×
  • Create New...