Jump to content
SAU Community

Recommended Posts

I'll be adding more quality stuff to this thread over the coming weeks as I revert the car to stock, so keep your eyes peeled!

For Sale:

BC BR Coilovers - Adjustable compression/rebound and base height. 8kg front 6kg rear springs. Less than 10,000km old. Perfect condition. Original receipt showing $1300 purchase price from JustJap included. $800

Hardrace Adjustable Caster Arms. Perfect condition, less than 5,000km use. Will also fit S14,15, R33, R34 $150

Genuine Nissan strut brace. Could use a paint if you're fussy. $100

Nismo Hardened Rack Bushes. New. Firmer rubber for more feedback/less steering play. $80

Genuine R33 Coupe Type M Pods. Excellent condition no cracks. Paint is useable. $120

Postage is available on everything at your cost. Pickup preferred of course.

Located Melbourne

PM or 0411 582 453

15542367_10209938668358371_1255439585409548420_n.jpg

18010268_10211111572440240_4905002718206547172_n.jpg

18056249_10211137354124766_1119399915833312957_o.jpg

Edited by colourclassic
Link to comment
https://www.sau.com.au/forums/topic/470143-r33-gts-t-performance-stuff/
Share on other sites

Nismo Long Hub Bolt For R33

These measure 10mm longer than stock, and offer greater security for aftermarket wheels/nuts.

Splines and threads all perfect.

Nismo Part Number: 40222-RS035

$50

 

Aluminium 3mm Spacer 

Hubcentric 114.3 PCD Spacer for fine tuning offset.

$20

 

 

18033993_10211156571205181_9037350131278092571_n.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Could be. Could also be that they sit around broken more. To be fair, you almost never see one driving around. I see more R chassis GTRs than the Renault ones.
    • Yeah. Nah. This is why I said My bold for my double emphasis. We're not talking about cars tuned to the edge of det here. We're talking about normal cars. Flame propagation speed and the amount of energy required to ignite the fuel are not significant factors when running at 1500-4000 rpm, and medium to light loads, like nearly every car on the road (except twin cab utes which are driven at 6k and 100% load all the time). There is no shortage of ignition energy available in any petrol engine. If there was, we'd all be in deep shit. The calorific value, on a volume basis, is significantly different, between 98 and 91, and that turns up immediately in consumption numbers. You can see the signal easily if you control for the other variables well enough, and/or collect enough stats. As to not seeing any benefit - we had a couple of EF and EL Falcons in the company fleet back in the late 90s and early 2000s. The EEC IV ECU in those things was particularly good at adding in timing as soon as knock headroom improved, which typically came from putting in some 95 or 98. The responsiveness and power improved noticeably, and the fuel consumption dropped considerably, just from going to 95. Less delta from there to 98 - almost not noticeable, compared to the big differences seen between 91 and 95. Way back in the day, when supermarkets first started selling fuel from their own stations, I did thousands of km in FNQ in a small Toyota. I can't remember if it was a Starlet or an early Yaris. Anyway - the supermarket servos were bringing in cheap fuel from Indonesia, and the other servos were still using locally refined gear. The fuel consumption was typically at least 5%, often as much as 8% worse on the Indo shit, presumably because they had a lot more oxygenated component in the brew, and were probably barely meeting the octane spec. Around the same time or maybe a bit later (like 25 years ago), I could tell the difference between Shell 98 and BP 98, and typically preferred to only use Shell then because the Skyline ran so much better on it. Years later I found the realtionship between them had swapped, as a consequence of yet more refinery closures. So I've only used BP 98 since. Although, I must say that I could not fault the odd tank of United 98 that I've run. It's probably the same stuff. It is also very important to remember that these findings are often dependent on region. With most of the refineries in Oz now dead, there's less variability in local stuff, and he majority of our fuels are not even refined here any more anyway. It probably depends more on which SE Asian refinery is currently cheapest to operate.
    • You don't have an R34 service manual for the body do you? Have found plenty for the engine and drivetrain but nothing else
    • If they can dyno them, get them dyno'd, make sure they're not leaking, and if they look okay on the dyno and are performing relatively well, put them in the car.   If they're leaking oil etc, and you feel so inclined, open them up yourself and see what you can do to fix it. The main thing you're trying to do is replace the parts that perish, like seals. You're not attempting to change the valving. You might even be able to find somewhere that has the Tein parts/rebuild kit if you dig hard.
    • Can you also make sure the invoices on the box (And none exist in the boxes) are below our import duty limits... I jest, there's nothing I need to actually purchase and order in. (Unless you can find me a rear diff carrier, brand new, for stupidly cheap, that is for a Toyota Landcruiser, HZJ105R GXL, 2000 year model...)  
×
×
  • Create New...