Jump to content
SAU Community

Recommended Posts

Transferring rego to VIC after moving here.. no RWC needed?

Just moved here from Tas with my Tas-registered Stagea. Saw this on the Vic Roads site:

Quote

 

If the interstate vehicle registration is current or not expired by more than 3 months and is going into the same name in Victoria, a RWC will not be required to register your vehicle in Victoria.

A RWC is required if you have purchased a vehicle interstate or if the registration is cancelled or expired by more than 3 months.

 

As-is, my car won't pass a Vic RWC (coilovers, front mount, various other things).. but it's legal/registered in Tas. Ultimately I plan on making it road-legal here just to not get pulled over constantly, but am I right that I can transfer my rego without an RWC, as-is, then spend the rest of the year slowly getting it ready for it's first "local" renewal with RWC? Or am I asking for trouble?

Otherwise I guess I just run it on Tas plates as long as possible until I can get it RWC-ready? What have others done when moving here?

As it is the first registration in Victoria, they may require a vehicle sighting at a VicRoads office to make sure engine / chassis numbers are legit.

Since it's not a stock car, this could pose an issue for you.

Try it... if it does get inspected and they say no. It still has TAS rego... Get the parts to put it back to legal, and register it then.

If the car has rego, you have owned it for at least 12 months and have rego certificate to prove it you'll be fine. I'm sure the vicroads website explains what is needed. I transferred my patrol from qld, I had original roadworthy and rego receipts. In the end all they cared about was if it had rego and the form was filled correctly. Didn't ask to see the car at all.

No RWC required if the car was in your name in another state

But they do sight the car when they issue you with new number plates, to check the engine and chassis numbers match up. Whether they'll care about what has been done to the car or not probably comes down to the person, but the guy I got didn't seem interested in all the modifications that were glaring in his face. Wouldn't give up his pocket mirror acrobatics until he'd properly sighted the very last digit of the engine number though lol

Cheers guys, will give it a shot and see what happens. Like you say @Odium, worst case they'll just say no. Just a bit nervous as everyone I've spoken to about moving here says my car is not Vic-friendly lol.

Just make sure you know where the numbers are located and make sure they are readable, clean off the area if needed to make it easier for the guy

Birds is right, Vicroads don't generally give a crap about modifications if they're not obviously ghetto.

My GTR turned up on a trailer with a bottom end bearing rattling its head off, a loud exhaust and a bunch of eBay spec piping / shiny shit in the bay...told him it was going straight to mechanics after I got it registered (truth) and he was only concerned about numbers. Bit of luck involved though - I was either gonna get the bureaucratic but friendly Indian dude or the pissed off looking middle age Caucasian guy who was already arguing with a customer when I was lined up.

Worst they'll do is say no, but I doubt it. RWC and modifications are more important when selling a car to someone because of the liability in a sale. Protip: RWC workshops tend to be more lenient on issuing a RWC if you are the buyer rather than the seller, because the buyer is less likely to complain something wasn't done and implicate the workshop in a shoddy inspection case.

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Man, different parts but the same numbers is terrible @dbm7! And it doesn't help that most online shops don't list the part numbers at all. They just give a list of compatible models...
    • Slow when hot could also be because its getting more dynamic compression, OR things are getting a bit tighter once it is all expanded. If it were an earthing issue, typically I'd expect you to have it have issues all the time. Unless it's really a combination of both things. Where the higher compression, and things being a bit tighter, is giving that bit of extra load and you do need a slight clean up on the cables/connections.
    • Yeah, this is one of the most annoying things about nissan part numbers... I've got an unrelated example... Image is of the AT output shaft ~ they have the same part#, but clearly the shaft on the left is beefier design to that on the right ...the difference (essentially) is the 'lighter' shaft on the right, is for engines up to RB25DE (this includes RB20 variants) : the shaft on the left is for RB25/26DET(T)....are they interchangeable? Yes...but obviously one shaft is going to be stronger than the other...and, the lighter shaft is around USD115, but the heavier shaft closer to USD150...same part#... ...epc-data usually tells a tale ~ the amayama listing for 39100-23U60 has a note "Longest side is between 60 and 105 cm" ; no such info is there for 39100-23U70 ...and given the great disparity in price between the 2 parts, it makes me at least curious (to the point of caution) where the 'extra money' went? ...ie; these 2 parts have a cost difference that (to myself at least) isn't explained by 'plastic boot'...ie; with amayama there's AUD700 price difference ...plastic versus rubber?...I'm not seeing it like that...and 60cm ~ 105cm...??...that's a huge disparity....something hinky going on here... I'd try searching by VIN, not model... /2cents
    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
×
×
  • Create New...