Jump to content
SAU Community

Recommended Posts

RB25 + R34 Garage Clean-out

Garage Clean-out:

Everything has been pulled from various working setups. Open to offers, prices copied from previous posts, welcome to inspect/test.
$300 - Blitz R34 RB25det Return Flow Intercooler 
$850 - HKS GT-RS Turbo
$600 - Kinugawa TD-06 20G Turbo + Highmount Manifold (RB25) + TiAL Sport Gate + Custom Dump Pipe
$800 - Apexi Power-FC ECU with Hand Controller R34 RB25det
$250 - Impul R34 RB25det ECU 
$200 - Custom Plenum Creations RB25 Forward Facing Plenum
$400 - Exedy HD Organic (NSK-7172SO) Good Condition
$50 - Stock GTR Fuel Rail and Injectors
$20 - Stock R34 RB25det SM Intercooler 
$50 - Stock R34 RB25det Throttle Body
$50 - Stock R34 RB25det Pink Label AFM
$100 - Stock R34 RB25det Cams
$100 - Stock R34 RB25det Turbo - Suits Rebuild
$100 - Stock R34 RB25det Coil Packs

  • The Kinugawa TD-06 20G was part of an engine package I purchased. It apparently made ~300kw on an RB25, I have not used myself. 
  • The GT-RS made a reliable and responsive 260kw on my R34.
  • Sold as is where is - Located Morningside, Brisbane.
  • Happy to provide further photos/info if required
  • Selling due to upgrades

 

I also have a Stock RB25 Engine available, currently stripped.

 

Cheers,

IMG_0207[1] (Copy) (Copy).jpg

IMG_0209[1] (Copy) (Copy).jpg

IMG_0199[1] (Copy) (Copy).jpg

IMG_0205[1] (Copy) (Copy).jpg

IMG_0460.JPG

IMG_0464.JPG

IMG_0466.JPG

IMG_0473.JPG

IMG_0474.JPG

IMG_0476.JPG

IMG_0477.JPG

IMG_0478.JPG

IMG_0479.JPG

IMG_0480.JPG

IMG_0481.JPG

IMG_0488.JPG

IMG_0489.JPG

IMG_0491.JPG

IMG_0493.JPG

IMG_0498.JPG

IMG_0500.JPG

IMG_0455.JPG

IMG_0456.JPG

IMG_0457.JPG

IMG_0458.JPG

IMG_0496.JPG

IMG_0495.JPG

Link to comment
https://www.sau.com.au/forums/topic/470358-rb25-r34-garage-clean-out/
Share on other sites

Motor is currently sitting at a workshop in Slack Creek - Brisbane Area. I'm going to have a chat to the builders to get a report on the condition. It apparently has forged internal goodies. Leave this one with me for today.  

  • Like 1
3 hours ago, macca911 said:

Motor is currently sitting at a workshop in Slack Creek - Brisbane Area. I'm going to have a chat to the builders to get a report on the condition. It apparently has forged internal goodies. Leave this one with me for today.  

Interested in motor. Please update when you can.

Motor is currently sitting at a workshop in Slack Creek - Brisbane Area. I'm going to have a chat to the builders to get a report on the condition. It apparently has forged internal goodies. Leave this one with me for today.  

 

Ok awesome mate thanks for your reply... Also, Pmed you

5 minutes ago, gold-3lt said:

Plenum 100% gone?

Hey mate, I have a guy coming to collect it tonight. If that falls through for any reason I'll let you know. 

Spewing. Got the notification of the ad on my mobile then read it intending to msg you about plenum but forgot. Been chasing a neo cpc plenum for ages. Definately message if sale doesnt go through

Gents, the plenum is for a Non-Turbo Neo. Even though it shows a it mounted to a turbo engine that engine must have had a non turbo head... Only found out tonight thanks to LaurelPWR. It's still available. Cheers 

  • Like 1


  • Similar Content

  • Latest Posts

    • Resizing injectors in Nistune can be done a couple of ways, and there are a couple of ways that you can make a mess of it. The tuner needs to be really aware of the effects of whichever approach he uses (either K, or TIM). They are both easy enough to "get the injector size right" to run the engine. But little details like old start enrichment and hot start are affected differently, depending on which boxes you check.
    • Pretty safe to say almost everyone that has tuned their own car has experienced this issue. The difference being that we have our laptop in the car and when it happens, it's literally 10 seconds of tuning to sort it.  Would you be happy to plug in your laptop and sort this yourself? It is a very simple process and there is no risk of harming your engine (if you are worried about that). 
    • Yeah thats the next step now, either they wil or i will take out for a drive to work and go straight their after work and see is we get the same issues 🤞  thought i try my luck here too, never know someone else might have had the same issue but thanks for the reply 
    • Basically your tuner needs to drive it for the 30 min (or whatever) to create the same conditions then check the ECU settings and sensors at that time. They may not be excited to because that takes them 30 min rather than just opening the bonnet and seeing the problem straight away.... Hot start is generally not as tricky as cold start, but there would be a table for fuel enrichment vs coolant temp as a starting point
    • Yeah, they all cant say anything for sure as everything is working fine . Said unable to find an issue untill it stops again. Could mist likely be CAS wiring or IAS valve issue but again not 100%
×
×
  • Create New...