Jump to content
SAU Community

Recommended Posts

44 minutes ago, niZmO_Man said:

PS4 is out apparently.

Yes there is only one size in 19's unfortunately which is the rear tyre size only so no staggered width (to match the stock setup and rims). The PS4S appear to have more sizes but isn't out yet.

I'm contemplating waiting it out for the PS4S but will check the compound as I have driven R compound before (I think they were 140 treadwear or so) and found daily driving required wheel spin in the 200sx to get traction on a commute in winter.

 

8 hours ago, R377 said:

Go ps2 or 3, RS3 or AD08. Maybe look at nitto

PS2 don't have suitable sizes in 19's for the V36 with stock 19 staggered rims from what I saw. Edit: OK, so the sites I was looking at had the 245/40/19 out of stock but appears 245/40/19 at front and 265/35/19 at the rear might be a possibility.... Although with the PS4 out I didn't look so hard at the PS2.. But this is a possibility now.

The PS3 is less of a performance tyre than the PS2 and PS4 (it's not an upgraded PS2 design necessarily) from what I read so excluded that. But I could be wrong.

The RS3 unfortunately only comes in the the 245/40/19 and 275/35/19 combo which is pushing the limits for the car and rims I believe.

And the AD08 appears hard to find in the right sizes (or even 20mm wider front and back), but can find the R compound AD08R in suitable sizes (both front and back 20mm wider than stock and 1% smaller all round) but feel an R compound for 99% daily drive might not be the best choice coming into winter.

Edited by Pete_Repeat

i would go 20mm max on the orig tyres so 245 front and 265 rear.  Your prob only track it once or twice so an ad08 or rs3 although great for the track will wear out much fast than a regular tyre.

We have continental mc5 on our v36 skyline 18".  They don't do do 19".  They are super comfy, low NVH and will get good km out of them.  We will do a track day and hillclimb here and there, for fun.  For a road tyre they grip well but would prob be 2 secs a lap slower than a semi on the track - who cares we aren't going for any records and for 99.9% of our driving they do us well on the road.

 

Your pretty obsessed with the ps4, can you get them from overseas ? 

1 hour ago, admS15 said:

AD08R is not an R compund. It's equivalent to a Hankook RS3.  A050/Z221  are R compound.

 

Edit Ad08 is the predecessor to ad08r, that why it would be hard to find and would be old stock 

Makes sense.

Anyone used or advise the AD08R for daily use then? Just their marketing really focus' on the track. I don't mind firm ride or anything, and would prefer a good turnin an less tyre roll but more concerned about getting heat into them.

 

Maybe I need to google a little more on them then.

I'd go 245/40 front and 265/35 rear

http://www.stgeorgetyres.com.au/tyres/yokohama-neova-ad08-265-35r19-semi-slick-tyres-2653519-265-35-19/product-detail.aspx

That's probably old stock, best to ask for production date

AD08 (not R), mate's old MY05 WRX STi, quite comfortable for daily use, more wet grip than the standard RE070. No track work unfortunately (he sold the car soon after). Extreme overkill for daily use but if you're tracking it, then might as well get them (or Potenza RE-71R). If you're doing a lot of driving then I'd go something like INVO or similar road tyre.

  • 1 month later...

OK. I am now determined to get the new Pilot Sport 4S. Stress on the S.

So it looks like the stock fronts 225/45/19 are ehre, but the rear 245/40/19 has no defined date (if any). Only available in the US at the moment.

So I am looking at the following with pro's and cons to each;

- Stock sizes

        - Too long a wait, if the 245/40/19 even get here seeing that is the only 19 inch size in the PS 4 so they may never bring it in who knows.

- 225/40/19 and 245/35/19

        - Cheapest combo by about $200 for the set of 4.

        -  Available now

        -  3.4% and 3.75% smaller rolling diameter so speedo out by almost 10% with 7% OEM error. This isn't a big problem for me really, other than when I finally track it that te 180 kmph limited will occur easier.

        - VDC and ABS should be fine I believe as almost the same reduction front and rear.

- 235/40/19 and 255/36/19

        - $200 more epxensive

        - Available mid August, although I can wait if need be

        -  2.2% and 2.6% smaller so a little less speedo error.

        -  VDC and ABS almost the same conditions as above.

 

Anyone have any comments?

Just now, The Max said:

Your determination to go with the PS4S is well-founded. I got them for the fronts because of the OEM size and they're worth every cent. They certainly outgrip my PS3 tyres in the rear.

I think I read too much as every tyre listed in this thread either didn't come in the right sizes or I eventually found feedback to say otherwise. These are the only tyre I have only  heard good feedback on. Yeh I know they are fairly new, but they have been out for 6 months in the states. 

I've gone round and round in circles really. From cheap to expensive. Tempted with some cheap option to find they were excessively noisy. Now sitting at the upper limit although the 225/40/19 and 245/35/19 (lower profile only) seem to be a "reasonable"  $1476 at the moment. I can live with the extra 3% speedo error (easier to calculate at 10% including oem error) knowing the ratio front to rear diameter/circumference is almost the same.

I'm almost there. Will likely order them unless someone throws a spanner in the works in the next day or two (more to do with sizing) . Sorta need the rears changed with this cooler weather as they spin easily in first gear in a straight line with the clutch already out.

Took the plunge. 

Pilot sport 4s with 225/40/19 and 245/35/19.

Price, availability and very similar diameter change sold me. 10 percent speed error here we come (only up a little from oem 7 percent) and 162km/h real speed limiter ha ha.

Getting installed on Saturday. 

Now deciding on wheel alignment settings. Might resurrect my other topic on this again.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Is it alright to top up with just another green coolant?
    • thanks GTSboy. My confusion at the moment is i am trying to locate the ignition, ECU battery power and the ECU negative The closest thing i can find is the for the S15 on Page 8 of the Wiring Specialties web page https://drive.google.com/file/d/0B9F33_M_GgENQnZ6STMxVmVNd1E/view?resourcekey=0-eZ4nNRwRoqa1qvKlWWHm8A I cannot find the same diagram for the R33 RB25DET Series 2 dash plug pin out.... Do you know what the Pins? or know where i can find the same pinout diagram for the RB dash plug? Thanks for the advice on the box... i like a 6 speed so might be on the lookout or the box now.. a topic of discussion for another post...
    • Will have a look at that. I cant see any leaks 
    • Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
×
×
  • Create New...