Jump to content
SAU Community

Recommended Posts

R34 gtr boost limiter?

Hey guys, so pretty much important myself a bayside blue 2000 r34 GTR, been super keen to get this car for the last couple months waiting, and today was the day to pick it up and drive it home, first 10 minutes car was a dream looked felt amazing just wanted I wanted, then... a problem started so  symptoms are this,

- start the car turbos/boost everything runs great, give it some gas and the turbos spool up to about 1 bar ( which I didn't think was stock boost settings but anyway ) 

then 5-10 minutes later I will go to just Accelerate normally and it will start to spool but when it gets to around .4 bar it will cut all the boost and the car will act like it has a speed limiter and not getting any air in, after that I had to keep driving the car in a higher gear to make sure it never gets into + boost because it would loss all power and not run, in 6th gear it will spool to around .2-3 bar at about 110 but as soon It gets over that bam cuts out again.

if I turn the car off and back on, problem immediately  goes away and car runs perfect again, then all of a sudden will start up again a couple of minutes later, watching the boost gage on MFD I can see it climbing into + boost then all of a sudden drops fully down ( with no wastegate noise or anything ) and the car staves for air.

any ideas of what it could be would be amazing, it's kinda put a downer on my excitement for getting this car, and really hurts when I still have a 1000km trip home with no boost 

 

Link to comment
https://www.sau.com.au/forums/topic/470406-r34-gtr-boost-limiter/
Share on other sites

Bummer, but these old cars need TLC like any other. 

If it happens only when the car is warm it could be vac line that expands, could be bad sensor (I once had a bad CAS and an O2 that would only play up warm). AFMs with dry solder joints can also play up when warm if they are only just started to go. 

You need to pop the bonnet and get in there for a look. Dos a boost leak test, get a field services manual and multimeter and test some sensors. If you are not comfortable with those basic testing things take the car to a workshop that knows RBs. 

Factory ECU? You can buy a consult cable (I think like $100?) and download ECUTalk for free.

 

  • Like 1

Seem to fix the problem, have driven about 600 more Kms and if hasn't gone into limp mode so that's always good, I pretty much unplug all the easy to get to cables blew them out and plugged the back in, someone I know also thinks that it could be because the car wasn't driven for 7-8 months that it could have build up somewhere and driving has fixed it 

 

cheers heaps for advice and help 

time to enjoy the car now 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
    • List all of your mods. It sounds like an aftermarket ECU hitting rev limiter. Like a valet mode, or a cold rpm limiter? 
    • @Kapr Haha yeah thats the one. I missed that you had a built up engine, I wouldn't want to run it on there either then. It was good in my situation just to replace the original turbo on a stock engine. @MBS206Yep definitely not a replacement for anything name brand
    • You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
×
×
  • Create New...