Jump to content
SAU Community

Recommended Posts

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

I have had my car for a year now and have only used my ABS once last winter...... ABS is good...i wouldn't pay HEAPS extra for it though depends what kind of a driver you are though...

Haven't really thought about it much...you get a ABS dash light though :mad:

It was wet roads and was on a cruise so even if i had normal brakes i prob would have been ok.....

Link to comment
https://www.sau.com.au/forums/topic/4705-r33-on-an-abs/#findComment-73271
Share on other sites

ABS for sure.

All it takes is not paying enough attention one wet night and not lifting when the wheels lock up = big nasty skid.

Never need crumple zones, seatbelt or airbag if you don't hit something in the first place:p

Link to comment
https://www.sau.com.au/forums/topic/4705-r33-on-an-abs/#findComment-73290
Share on other sites

Yeah, I thought they where standard on the series II's... Maybe to start off with they just imported the ones with the ABS cause they would sell better.

OH well.... Mines a series 1 and it's got ABS :mad: but it stopped working a few days ago... :P still have to figure out why it's stopped .....

Link to comment
https://www.sau.com.au/forums/topic/4705-r33-on-an-abs/#findComment-73341
Share on other sites

ABS is definitely not standard on seriesII

my friends seriesII didn't have ABS but my series1 did as an option, it is pretty rare and if i were u tgriffin i wouldn't bother only searching for cars with abs, you'll be looking forever. I'd say about 2/5 R33s would have ABS.

Link to comment
https://www.sau.com.au/forums/topic/4705-r33-on-an-abs/#findComment-73358
Share on other sites

Guest tgriffin

Thanks for the info guys.

As far as I've ascertained it's an option throughout the R33 range, but the R34s come with traction control and ABS standard.

Thanks for your help guys, I was a bit hung up about getting ABS cos I'm upgrading significantly (1.6L 86kw -> 2.5L turbo ~190kw!!!), but they seem so rare.

Link to comment
https://www.sau.com.au/forums/topic/4705-r33-on-an-abs/#findComment-73401
Share on other sites

I got it from Dean (vspecv on the forums) (http://www.upimports.com.au/).

I have nothing but praise for Dean's service. I was so fussy and he never got frustrated after I kept rejecting car after car!

The car is a silver Spec-II 1996, turbo, manual, 51,000kms (with ABS! hehe) with an exhaust and some aftermarket wheels. Just what I wanted!

Link to comment
https://www.sau.com.au/forums/topic/4705-r33-on-an-abs/#findComment-74603
Share on other sites

Guest tgriffin
Originally posted by Phil

I got it from Dean (vspecv on the forums) (http://www.upimports.com.au/).

I have nothing but praise for Dean's service.  I was so fussy and he never got frustrated after I kept rejecting car after car!

The car is a silver Spec-II 1996, turbo, manual, 51,000kms (with ABS! hehe) with an exhaust and some aftermarket wheels.  Just what I wanted!

Whoa! That is just the car I wanted.. so where abouts do you live? :) j/k

Link to comment
https://www.sau.com.au/forums/topic/4705-r33-on-an-abs/#findComment-74640
Share on other sites

Originally posted by MR-GTR

1993 -95 had ABS as option

1996 series 2 fitted with twin air bags as standard have ABS standard.  

if it don't its not a true series 2 , you have been ripped off

the ABS works with the air bag system. its a world design feature.

Regards

Steve (MR-GTR)

thats wrong,abs is an option on all r33 gtst,whether it be series 1 or 2.

i have landed plenty of s2 1996-1998 without abs and yes they can be difficult to find with abs,i have a customer who we have been looking for a silver car with abs and of all the 96-98 models we looked at only approx 25% had abs

Link to comment
https://www.sau.com.au/forums/topic/4705-r33-on-an-abs/#findComment-75615
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Waaay ahead of ya....(evil laugh!!) Will show the fitment and spec details later when it isnt as rainy !
    • Thanks Dose.....    I appreciate it!!
    • I'll probably be putting the shit box back on the dyno again soon, I want to dial in the closed loop boost control properly. I'll have a camera facing the car/motor for fun too. Just note, there are essentially 3x 10AN inlets going into the catch can and 1x going back to the intake pipe. Most of the time the catch can "return" to the sump actually is the crank case breather, pushing air out.
    • I have the R3C with a Nismo slave and by no means does it behave like a stocker, it ain’t THAT bad. On take off just give a bit more throttle than you would say a coppermix and it’s fine. It will not slip though.   
    • Okay. Final round of testing done. Got a friend to hook up a fancy scanner to the car and we also ran some compression and leakdown tests, she is healthy.  The MAF was definitely the culprit. So for future reference anyone with similar issues that find this thread. I suggest the following steps, in order of affordability:   Check your spark plugs for any fouling, replace plugs if they are bad or re adjust the gaps making it narrower (0.8mm would be good). Check every coil's resistance with a multimeter. It can be done by probing the IB and G pins on the coil pack. Resistance should be around 1.4 (+/- 0.1) Ohms Check the MAF. If you have Nissan connect or a good scanner with the 14 adapter it should allow you to see the voltage on the MAF reading should be around 1.1 - 1.2V when car is idling. But if you don't, buy a new MAF from Amazon and test, then return it. (For instance, I got a Chinese one for $40 that was reporting 1.3v on idle). If you still have scanner, you can run tests on the injectors to see if they are working, just remember to unplug the fuel pump fuse/relay and have no pressure on the line. Then listen for the noises that the injectors make. Clean/replace injectors as needed. Once you find the issue and fix, order thousands of dollars worth of OEM parts to refresh unrelated things (Optional)   PS: Thanks to the absolute legends of this forum for the responses and help to someone that went a bit over their head. (me)
×
×
  • Create New...