Jump to content
SAU Community

Recommended Posts

HELP! With My R33

Hi guys!!! G.night from Spain.

I've a big question regarding my upgrade preparation. I've at home about to mount a GTX3076R BB of ATPturbo, external Gate 38mm turbosmart, Aem Afr x-series wideband 4.9, for now I carry these mods: Ecu, injectors and AFM Stock.

The big question is:

* Guys, can I mount all this, put 740 CC injectors and regulate as much as possible Ecu and Afm stock? If so, how many BHP can I get? *

Manythanks to all who help me and I said. Cheers?

Link to comment
https://www.sau.com.au/forums/topic/470731-help-with-my-r33/
Share on other sites

No you cannot do this with stock ecu.

You will also need a better than stock intercooler and exhaust.

The easiest way to overcome the limitations of the stock AFM is to get a Link ECU which involves replacing the AFM with a MAP sensor.

(Spanish dealers listed here): http://www.linkecu.com/dealers/europe/

Or cheaper but more tricky in Spain would be to get a Z32 AFM and ecu and fit it with a Nistune chip ...  google or ref https://www.nistune.com/

If you do it right with the proper tune you can make in excess of 300KW easily.

 

 

Thanks for the quick reply friend. I sell an acquaintance of Uk a full nistune ECU for my rts g33 and another friend for the same price a greddy and manage but the problem is that for r34 gtt, I dont know if I use the cables for my gtst r33. Which one would you recommend? Nistune with injectors 740 CC and afm z32 or ecu greddy and mánage and put map (if so that it works on mine). Thanks again mate. Cheers 

36 minutes ago, KiwiRS4T said:

No se puede Nistune el R33 de ahí mi post anterior ECU re Z32 etc. Greddy E Administrar no es realmente lo que necesita.

But, I mean nistune chip soldered in ecu r33 gtst + afm z32. Accompanied by the following mods: Gtx30 BB, front intercooler, complete exhaust in 3 ", wastegate screamer 38 mm, spark plugs upgrade, injectors 740cc nismo, intake system and exedy stge2 clutch.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...