Jump to content
SAU Community

Recommended Posts

Rb25 det running poorly - coil related?

not sure if related to the coil or dirty plugs but my rb25 seems to run with a struggle in low rev range. The rev range is not smooth and feels like its spitting.

It has 5 red jacket coils and 1 standard coil which the previous owner diagnosed as the cause of the issue. 

Im in the process of removing plugs and just needed a confirm from others who have had this issue resolved.

is it the odd coil, dirty plugs, or both? 

Thanks 

Edited by AARR34

Could be anything but borrow a known good set of coils to confirm. I would only use genuine OEM coils or Splifires. Pull the plugs while the coils are out and if they are not in good cond get a new set gapped to 0.8mm

  • Like 1

Is the problem noticeable at idle?

If so, pull coilpack plugs one at a time while idling. Listen for a note change as you pull the plug. If there is no note change or a less pronounced note change one one, then chances are that is your dud coil (if that is indeed the problem)

  • Like 1
On 09/06/2017 at 11:38 PM, 89CAL said:

Is the problem noticeable at idle?

If so, pull coilpack plugs one at a time while idling. Listen for a note change as you pull the plug. If there is no note change or a less pronounced note change one one, then chances are that is your dud coil (if that is indeed the problem)

yeah it happens in idle and gets less noticeable as the revs climb.

I just hope its nothing major to do with the motor. I'm getting new plugs to go in with the coils. The owner had mixed plugs and 3 of them require a larger socket to take out. 

I don't get why people do that 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah i found that alot of parts can be wrong or "very" hard to get the real right one. I already bought some brakes years ago on me "old" GT calipers and they were wrong too 😄  I told them too. Even send them pictures...but they said "EBC catalogue has them on my car... So i dont know what their answer will be. I call monday them and let them know that they are really not on my car. If they were they would be already on a car...
    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
×
×
  • Create New...