Jump to content
SAU Community

Recommended Posts

R33 GTR coolant leaking

I found out lately coolant leaking at the back of the engine under intake manifold. There is a pain on the ass to check this, cant see anything. I think i will have to take out my intake manifold

I tracked day my car on hot weather and after 10 minutes of hard driving on the track all coolant leaked out under high pressure. After next 15 minutes all cooland was out, about 4 liters. Something is not holding right on big pressure inside the cooling system. I did not had problems like this before and have done around 50 000km after single turbo convertion. Never experineced single cooland leaking before. 

I am planning to do it myself with some random shop and try to fix the problem. What seals should i change or can be the thermostat?

Where is the thermostat located in the r33 GTR?

I am thinking also about the turbo water lines, what else should i check or change? I have only one shot after i take this intake manifold so i want to change everything i can and all the seals.

I attached the photo where this cooland leaking occurs. 

Also this leaking is no all the time, most of the time i drive there is no leaking at all, on normal daily driving or during the night.

Anybody experienced such a problem?

 

 

 

$_nissan_skyline_gt_r_rb26_japonia_$1415726294_by_motokiller10.jpg

Link to comment
https://www.sau.com.au/forums/topic/471000-r33-gtr-coolant-leaking/
Share on other sites

Yeah right under there is T ( for want of better word ) where the feed for the turbo water line and something else ( maybe heater ) comes out of head or maybe too if block. But no surprises you have leak there. Only under high pressure so could just be clamp not holding. Intake off is a prick.
Obviously left hand drive !? Looks weird with brake booster etc on hot side.

4l in 15 min is a big leak.it will be obvious where it is coming out. If the hose isnt split try replacing the clamp. If you spot fix this leak expect another leak to follow in the short term.

At least you will be back on the road driving. No one likes chasing heater hose leaks.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
×
×
  • Create New...