Jump to content
SAU Community

Recommended Posts

GTR34 Brembo's, Bosch 2000cc injectors, 5 stud rear hubs, handbrake pivot, spare wheel

No holds and no shotguns, nothing is sold till it's paid for or a deposit is put down.
I can ship anything anywhere if you pay for it. Pickup is available no probs.
Location: Homebush/Sydney

-

GTR R34 Brembo painted red (yes it's R34 GTR gold under the red), front and rear set, freshly machined rotors, lots of pads, not separating not separating not separating not separating = $2000.

S15 rear 5 stud hubs = $150

S15 spare wheel = $50

R33 rear handbrake shoe pivot = $20

4x Bosch 2200cc injectors = $200

-

No holds and no shotguns, nothing is sold till it's paid for or a deposit is put down.
I can ship anything anywhere if you pay for it. Pickup is available no probs.
Location: Homebush/Sydney

 

20170802_165547.jpg

20170802_165553.jpg

20170802_165515.jpg

20170802_165537.jpg

20170802_165539.jpg

20170802_165544.jpg

20170527_145332.jpg

20170527_141445.jpg

20170527_143408.jpg

20161103_120637.jpg

  • 2 weeks later...

Prices dropped:

GTR R34 Brembo = $2000 now $1900

S15 rear 5 stud hubs = $150 now $120

S15 spare wheel = $50 now $40

R33 rear handbrake shoe pivot = $20 now free if you buy something else

4x Bosch 2200cc injectors = $200 now $180

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • How would you even adjust the clutch if the pedal already has the correct free play? The operating cylinder has no adjustment in mounting position or rod length. On pull style clutches there is also no ability to adjust the bearing carrier. Push type I can see how adjusting the carrier height makes it all work.   If this is the twin plate clutch did you verify that your friction disks were oriented correctly? It's not mentioned in the directions at all you just have to notice that one side the friction disks have a part number on the hub fingers and a subtle coning to those fingers. Another thing that I noticed was if you put the friction disks in backwards the pressure plate fingers will not be even and flat when the clutch is installed.
    • yeah, mechanically, it is probably do-able, off the top of my head, there would be the transfer case, which I believe will bolt up to the rear of the RWD transmission, the shorter rear tail shaft. A front drive shaft, front diff, engine upper sump, front drive shafts, front hubs and front AWD struts (they are shaped around the front drive shafts), LCAs (at the very least from the front suspension) oil cooler.  You might want the rear diff from an AWD too, so you can be certain the front and rear diff rations are identical.  Who knows what brackets and mounts you might need.  So a whole doner car might be the best option if you need to maintain RHD. Then actually making it work, that would be a whole different story.
    • Take the fall as a warning sign for future endeavours  Stay safe mate
    • hi mate, HKS cooler piping still available by any chance?
×
×
  • Create New...