Jump to content
SAU Community

GTR aftermarket and stock parts (cheap)

gtr13
 Share

Recommended Posts

gtr13 Proficient

gtr13

Posted
Posted

Got to clean out the garage

R33 GTR main gauges speedo tacho etc has 25,000klm on clock $200

R33 three centre gauges #SOLD#

R33 GTR fuel pump $220

R33 GTR injectors $280

R33 GTR AFM x2 #SOLD#

R33 standard intercooler pipes $80

HKS AFM pipes from AFM to air filter pod #SOLD#

R33 GTR clutch kit from unique autosports 40% increase in clamping pressure bronze cerametallic clutch plate done approx 3500klms new $850 sell for $150 ( check unique autosports webpage)

R33 GTR stock cam gears x2 $50 for both

R33 stock fuel regulator $20

make an offer you never know!

gtr13 Proficient

gtr13

Posted
  • Author
Posted

the three centre gauge consists off front torque,oil temp and a boost gauge

the clutch is a pull type ,i think 33gts is push so you might need some sort of kit to change it over to a push type setup other than that iam not sure.

gtr13 Proficient

gtr13

Posted
  • Author
Posted

I dont think so as the gtr injector is low impedence top feed where as a rb25 is side feed high impedence you would have to change your fuel rail . I think they are better suited to upgrade for the rb20 in the R32 gts.

gtr13 Proficient

gtr13

Posted
  • Author
Posted

CroatianDlite yes they are both for a R33 GTR they are the stock guages $280 for both plus postage

Blitz_R33 the clutch was only used for about 3 to 4000 klms over about 6 months it was taken out and replaced with a twin plate when i upgraded my turbos, unique autosports claim it can hold onto 300kw atw i never pushed it that hard only dropped the clutch 3 times running mid 12's and it never slipped, i would say it would have at an uneducated guess closer to 60 to 70% left in the plate iam not really sure and iam certian unique autosports could supply a new clutch plate if needed this is why i have it at this price

Beer Baron Grand Master

Beer Baron

Posted
Posted
CroatianDlite yes they are both for a R33 GTR they are the stock guages $280 for both plus postage

Blitz_R33  the clutch was only used for about 3 to 4000 klms over about 6 months it was taken out and replaced with a twin plate when i upgraded my turbos, unique autosports claim it can hold onto 300kw atw i never pushed it that hard only dropped the clutch 3 times running mid 12's and it never slipped, i would say it would have at an uneducated guess closer to 60 to 70% left in the plate iam not really sure and iam certian unique autosports could supply a new clutch plate if needed this is why i have it at this price

Interested in the 33GTR centre gauges. Do you know (or does anyone else know) if these will plug into an R32 GTR?

Thanks,

Richard

gtr13 Proficient

gtr13

Posted
  • Author
Posted

OK

mmmgtir i wouldn't know i dont think R32's have the front torque meter on them do they?

Blitz_R33 postage looks to be about $25 from Townsville to Brisbane the weight is around 20kg

Stirlo_GTR Sorry the pipes have been sold

  • 2 weeks later...
Beer Baron Grand Master

Beer Baron

Posted
Posted
OK    

mmmgtir i wouldn't know i dont think R32's have the front torque meter on them do they?

Blitz_R33 postage looks to be about $25 from Townsville to Brisbane the weight  is around 20kg

Stirlo_GTR Sorry the pipes have been sold

Yeah they do, they have the same three gauges, only difference is that the R33 ones are angled slightly, I'm just wondering if the plug etc is the same?

Richard

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • Kinkstaah
      Wheel Sizes & Offsets For Skylines

      By Kinkstaah · Posted

      If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • GTSBoy
      Wheel Sizes & Offsets For Skylines

      By GTSBoy · Posted

      If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • MBS206
      MAJOR FUEL ISSUES 25det neo r32

      By MBS206 · Posted

      Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...