Jump to content
SAU Community

Recommended Posts

Hi Guys,
An opportunity has come up for me to purchase my dream wheels so looking to move my other sets on (both will be ready in around 2 weeks)....
first set; Nismo/Rays LMGT 2's
17x9 +20 all round
recently refurbished (polished, new chromed stainless bolts)
-centres stripped and resprayed in 32 gtr gunmetal, clear coated then stickers added and cleared again. Barrels have been sprayed in high temp clear to prevent brake dust from sticking.
-New genuine rays valve stems
-comes with new billet centre caps anodised black (i have a set of original centre caps that will go with as well some tabs broken).
-comes with nismo wheel nuts ( only certain nuts fit these wheels)
looking for $3800 ono
 
BBS LM's
18x9 +20 all round
going through a bit of a refurb currently barrels are getting the small amount of gutter rash welded up and re polished.
-New black stainless bolts
-barrels getting high temp clear coated
-faces are in good condition (some have some chips) but can't find a colour match I'm happy with to respray them in so staying as original.
-genuine black centre caps.
looking for $2600 ono
Again they are not ready yet but looking for some solid interest so i can put a deposit down on the other wheels. Can post at buyers expense, fell free to PM me if you have any questions.
thanks!
 

IMG_5579.JPG

IMG_5580.JPG

IMG_5581.JPG

Link to comment
https://www.sau.com.au/forums/topic/473115-nismo-lmgt2s-and-bbs-lms/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A little more work this week.  Fitted astra power steering pump in the boot with a lowe fabrication bracket. Gave the pump a good clean, fitted Anderson plug and high pressure fitting. With the intercooler being flipped under rad support factory headlights weren't going to work. Ordered a set of origin battle lights, they arrived so got them test fitted. Will require some fiddling to fit nice but was an easy quick option for now. And today we pulled out the manual Rb gearbox and test fitted a ZF 8HP50. It will fit with some casting tabs cut off and small tap of the tunnel with a hammer. Pick up the adapter plate Wednesday so hopefully all bolted in Friday and measure for tailshaft which will be a 2 piece. Been doing a lot of ecu, pdm and tcu loom design so when comes to wiring it in a few weeks will all go smoothly.
    • FYP. Sadly. Even bolt cutters wouldn't take 2 sec. But in the days of 18v angle grinders, nothing is safe.
    • One piece driveshaft I would recommend a dual CV setup otherwise stick to OEM. I have heard most one piece driveshafts cause excess vibration otherwise. The transmission grind I'm quite familiar with. You can try shockproof gear oil, otherwise you need a new transmission. The shifter is extremely simple on these cars. If you want pull apart the assembly and replace the plastic bushing but I doubt that fixes anything. The tail light issue is very common, unfortunately new tail lights are long discontinued. The trunk antenna going up always is because your radio doesn't have a true power antenna control, just remote amp power signal. There is a blank switch plate that you can pop out and install a switch for this or alternatively source a head unit that has proper antenna control. Throttle body sticking you have to disambiguate by disconnecting the cable and seeing if the linkages are the problem or something else. There is a procedure to adjust them, refreshing them is also somewhat involved if that's the issue. I have dealt with many of these issues. Old cars really are fractals of problems. The more you fix the more you discover there is to fix.
    • Welp, you've got a long list of experiences right there. I'd say you're on the right path.
    • That's correct, suits my requirements a bit better. Sure there are also numpties there, however it's generally a different vibe and more my kind of vibe.
×
×
  • Create New...