Jump to content
SAU Community

Recommended Posts

Hi All,

Clearing out the garage and found a few things i'm unlikely to have a use for.

Trust/Grex Oil cooler. Sandwich type with thermostat. Suit R32 GTR and mounts the core in front of the AC condenser. $700

R32 Cusco front and rear strut Braces. $80 each

HKS pods suit stock afm's $50

R32 GTSt LH Tail light $50

2 boxes of GTR junk, stock exhaust manifolds, heat shields, intake resonator, twin turbo pipe (missing badge), bunch of oil and water lines, overflow bottle $free

Stock R32/S13 suspension arms, pretty sure i have 2 sets of all the rear arms, $20 per arm

R32 GTR steering wheel, pretty rough, has the GTR horn button $50

S14 diff, pretty sure it's a manual 3.9ish ratio $50

S13/14 drive shafts 3x2 bolt type $50 a pair.

Prefer local pick up but i can ship at buyers expense.

Contact via pm.

IMG_20180121_114035436.jpg

IMG_20180121_114047377_HDR.jpg

IMG_20180121_114436857.jpg

IMG_20180121_115056481.jpg

IMG_20180121_115102150.jpg

IMG_20180121_115800283.jpg

3 hours ago, hotz said:

I am interested in the gtr steering wheel.  Would u pls send me a photo of it. Thanks.

I'll grab one tonight

1 hour ago, iruvyouskyrine said:

Is the diff ABS?

 

I think so, will check and get back to you

4 hours ago, iruvyouskyrine said:

Is the diff ABS?

 

It's abs, but unfortunately looks like an auto 3.7...my mistake.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...