Jump to content
SAU Community

CDDB update via internet

LesF
 Share

Recommended Posts

LesF Explorer

LesF

Posted
Posted

I have used the import/export functions to update the CDDB information after loading a CD into Music Box,  this is a fairly simple process, but I see there are menu options for updating the CDDB data over the internet.

Does anybody know how I can get the car connected to the internet?

Can I create a wifi hotspot on my phone and connect via that, or can the car connect to the internet through Bluetooth?

Or is the internet connection one of those proprietary things that only work in Japan in conjunction with Carwings etc?

-- 

2010 370GT coupe

Link to comment
https://www.sau.com.au/forums/topic/474075-cddb-update-via-internet/
Share on other sites
  • 2 weeks later...
The Max Mentor

The Max

Posted
Posted

No internet connection available for our AV systems dude. That's just the way it is.

While I'm not inspired by CDDB for anything, I'm actually building my own navigation and music source in a little Gigabyte i7 NUC (hand-sized mini computer), which will have a Garmin GPS antenna plugged into it. The external DAC will plug into one of the other USB ports to convert to decent analogue audio to feed into the Aux input in my console, while the HDMI feed will be converted through a composite video converter (a quality one though) to feed the video Aux input.

Then the next step will be to adapt the touchscreen's serial output to feed the NUC as a mouse, effectively. That should complete my navigation and audio solution. I've had enough of Mirrorlink devices to connect to mobile phones because quite frankly, mobile phones shit the bed too often, battery issues arise, etc.

So yes, it will then be possible to have internet connectivity in my car to take advantage of. :)

LesF Explorer

LesF

Posted
  • Author
Posted

Have you got any specs on the touchscreen output?  I hadn't heard of that.

I have a Orange Pi that I might be able to configure for suitable video output, it could be entertaining to put it in and see what software ideas I can come up with.

Also do you have any specs on the video resolution, framerates etc?

 

The Max Mentor

The Max

Posted
Posted (edited)

I believe the touchscreen panel is a 4-wire serial but that's the last step in the homework I intend to do and develop some kind of sharing switch for, in the event that I want to use the touchscreen to dial a number on the handsfree (rarely the case).

I don't have anything about the video resolution, though I assume being from Japan, it will be the typical NTSC-J standard, which is still 525 lines, 60Hz refresh. Even if the converter you find only does NTSC-M, the only significant difference is the colour temperature in which it operates (9300K vs 6500K). Not really a big deal when you're going to be displaying maps on it.

Edited by The Max

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Chupapy
      Help! Leak coming under transmission

      By Chupapy · Posted

      Thanks for the reply mate. Well I really hope its a hose then not engine out job
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      But.... the reason I want to run a 60 weight is so at 125C it has the same viscosity as a 40 weight at 100C. That's the whole reason. If the viscosity changes that much to drop oil pressure from 73psi to 36psi then that's another reason I should be running an oil that mimics the 40 weight at 100C. I have datalogs from the dyno with the oil pressure hitting 73psi at full throttle/high RPM. At the dyno the oil temp was around 100-105C. The pump has a 70psi internal relief spring. It will never go/can't go above 70psi. The GM recommendation of 6psi per 1000rpm is well under that... The oil sensor for logging in LS's is at the valley plate at the back of  the block/rear of where the heads are near the firewall. It's also where the knock sensors are which are notable for 'false knock'. I'm hoping I just didn't have enough oil up top causing some chatter instead of rods being sad (big hopium/copium I know) LS's definitely heat up the oil more than RB's do, the stock vettes for example will hit 300F(150C) in a lap or two and happily track for years and years. This is the same oil cooler that I had when I was in RB land, being the Setrab 25 row oil cooler HEL thing. I did think about putting a fan in there to pull air out more, though I don't know if that will actually help in huge load situations with lots of speed. I think when I had the auto cooler. The leak is where the block runs to the oil cooler lines, the OEM/Dash oil pressure sender is connected at that junction and is what broke. I'm actually quite curious to see how much oil in total capacity is actually left in the engine. As it currently stands I'm waiting on that bush to adapt the sender to it. The sump is still full (?) of oil and the lines and accusump have been drained, but the filter and block are off. I suspect there's maybe less than 1/2 the total capacity there should be in there. I have noticed in the past that topping up oil has improved oil pressure, as reported by the dash sensor. This is all extremely sketchy hence wanting to get it sorted out lol.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      I neglected to respond to this previously. Get it up to 100 psi, and then you'll be OK.
    • MBS206
      Mistakes were made, my R34 Story

      By MBS206 · Posted

      I agree with everything else, except (and I'm rethinking this as it wasn't setup how my brain first though) if the sensor is at the end of a hose which is how it has been recommended to isolate it from vibrations, then if that line had a small hole in, I could foresee potentially (not a fluid dynamic specialist) the ability for it to see a lower pressure at the sensor. But thinking through, said sensor was in the actual block, HOWEVER it was also the sensor itself that broke, so oil pressure may not have been fully reaching the sensor still. So I'm still in my same theory.   However, I 100% would be saying COOL THE OIL DOWN if it's at 125c. That would be an epic concern of mine.   Im now thinking as you did Brad that the knock detection is likely due to the bearings giving a bit more noise as pressure dropped away. Kinkstah, drop your oil, and get a sample of it (as you're draining it) and send it off for analysis.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      I myself AM TOTALLY UNPREPARED TO BELIEVE that the load is higher on the track than on the dyno. If it is not happening on the dyno, I cannot see it happening on the track. The difference you are seeing is because it is hot on the track, and I am pretty sure your tuner is not belting the crap out of it on teh dyno when it starts to get hot. The only way that being hot on the track can lead to real ping, that I can think of, is if you are getting more oil (from mist in the inlet tract, or going up past the oil control rings) reducing the effective octane rating of the fuel and causing ping that way. Yeah, nah. Look at this graph which I will helpfully show you zoomed back in. As an engineer, I look at the difference in viscocity at (in your case, 125°C) and say "they're all the same number". Even though those lines are not completely collapsed down onto each other, the oil grades you are talking about (40, 50 and 60) are teh top three lines (150, 220 and 320) and as far as I am concerned, there is not enough difference between them at that temperature to be meaningful. The viscosity of 60 at 125°C is teh same as 40 at 100°C. You should not operate it under high load at high temperature. That is purely because the only way they can achieve their emissions numbers is with thin-arse oil in it, so they have to tell you to put thin oil in it for the street. They know that no-one can drive the car & engine hard enough on the street to reach the operating regime that demands the actual correct oil that the engine needs on the track. And so they tell you to put that oil in for the track. Find a way to get more air into it, or, more likely, out of it. Or add a water spray for when it's hot. Or something.   As to the leak --- a small leak that cannot cause near catastrophic volume loss in a few seconds cannot cause a low pressure condition in the engine. If the leak is large enough to drop oil pressure, then you will only get one or two shots at it before the sump is drained.
×
×
  • Create New...